Model #UC1 CANON Misc Camcorder

  • No Image Available - Fidelitone
    3 Results
Find part by diagram >

Question and Answers

Q:

Bosch Control Module 481304 switches WFL 2060 UC/1 FD8211

A:

I'm answering my own question but now have another question. I adjusted the switches to match the settings on the original control board with a jewelers magnifyer and tiny screwdriver. After reinstalling all the buttons and the board seem to work fine BUT this is a re-replacement board from Sears, the first one i installed didn't have paperwork teling me that the switches needed to be set first or "CAUTION If settings aren't done correctly washers can eventually be damaged". so i installed that board without changing switches but there were other issues with it. Long story short with the new board the drum will not turn not there is just a buzzing sound. I'm confident that the motor is good, what should i look into first.

Read More
ric -
December 07, 2014
A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your washer. Upon research model number WFL2060UC; there is not a special tool required. Usually if a special tool is required the instructions will state it. If the instructions indicate to adjust them then it would be best to do so.

Thank you for choosing Sears. We appreciate your business. Have a great day.    

.    

Read More
Jeff Wallace Jr -
Sears Technician
December 09, 2014
See more answers
Q:

how do i install the control module on Bosch washer?

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you. I did look into your question, and I do apologize you do not turn the switches on on the circuit board. You will need to install the part and configure the module.

After installing module, enter test program by first pushing and holding menu and select buttons, then rotating the selector switch (dial) to permanent press cold (until display comes on). 

Push menu button repeatedly to scroll to test "T5": Model Varient Coding. Red light on start/pause button will be flashing. Push start/pause button to enter test T5 to change #'s. Red light will stop when entered into T5 testing. 

Push Menu button to scroll to each number. For each number, push select button until correct setting is chosen, then push start/pause button to save setting. Repeat until settings for all eight #'s are saved. U.S. washer must show 42010011.

When settings for all eights are saved, exit test program by rotating the selector switch to Off. 


You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

Please resubmit your question if you have any other problems. 

Read More
Natasha12 -
Sears Technician
September 23, 2014
A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you. I did look into your question, and I do apologize you do not turn the switches on on the circuit board. You will need to install the part and configure the module.

After installing module, enter test program by first pushing and holding menu and select buttons, then rotating the selector switch (dial) to permanent press cold (until display comes on). 

Push menu button repeatedly to scroll to test "T5": Model Varient Coding. Red light on start/pause button will be flashing. Push start/pause button to enter test T5 to change #'s. Red light will stop when entered into T5 testing. 

Push Menu button to scroll to each number. For each number, push select button until correct setting is chosen, then push start/pause button to save setting. Repeat until settings for all eight #'s are saved. U.S. washer must show 42010011.

When settings for all eights are saved, exit test program by rotating the selector switch to Off. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

Please resubmit your question if you have any other problems. 

Read More
Natasha12 -
Sears Technician
September 23, 2014
A:

I have a similar question but i guess my appliance number is slightly different and may require a different answer as i don't have such a screen/menu button. I have a WFL 2060UC /1 FD8211 with a power wash/rinse plus/quick wash buttons and am not sure if i need to adjust the switches. If i do similar question is there a special tool?

Read More
ric -
December 06, 2014
See more answers
Q:

I have a craftsman lawn tractor 917.270750 Need the belt pattern diagram Craftsman Tractor

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
I have attached a few diagrams below for the belt routings. One if for the mower deck, and the other is for the ground drive. 





Also, the owner's manual for this tractor has some pretty good step-by-step instructions and visual diagrams on page 23. If you don't have a copy of the owner's manual, I have provided a blue link below that you may click on to be directed to SearsPartsDirect.com to view and download the manual if needed. Hope these visuals help.

Owners Manual for Model 917270750

Thanks for using SearsPartsDirect.com. We appreciate your business.

Read More
Jeff Wallace Sr -
Sears Technician
May 20, 2014