Model #U8149-900 HOOVER Vacuum, Upright

  • Agitator, Mainbody, Hood
    3 Results
  • Motor, Turbinehandtool, Handle
    3 Results
Find part by diagram >

Question and Answers

Q:

Can I order a brush and belt replacement kit for a Hoover upright (model U8149-900) without picking through a parts diagram trying to order the needed parts? U8149-900 Hoover Hoover uprt

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there are parts needed for the vacuum.
 
Glad to help out.   Im  looking at your Hoover Upright model number u8149-900.

This model of Hoover Upright that you have is a direct drive and there is no belt.    There are 4 beater bars on this model so to change them you need to order 2 of each.  I have the picture for you below to look at,   They are key number 33 and key number 34.

Hoover Vacuum model U8149-900

I hope this answers your questions but if you need further assistance please resubit another question with additional details.
 

Read More
Larry L -
Sears Technician
March 03, 2014
Q:

For Hoover WindTunnel V2 (model U8149-900). Circuit Breaker

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Jackie S -
November 07, 2011
A:

If the roller brushes are turning freely, the circuit breaker has failed. Be sure there is not a problem with the roller brush bearings. If they are turning freely, replace the circuit breaker.

The part number of the circuit breaker/switch is 27854030 and the price is $20.99. You can order the circuit breaker at Parts Direct

Read More
Jimmy K -
Sears Technician
November 08, 2011
See more answers