Model #U6476-910 HOOVER Vacuum, Upright

  • Agitator, Mainbody, Hood
    3 Results
  • Motor, Handle, Hose, Outerbag
    3 Results
  • Turbinehandtool
    3 Results
Find part by diagram >

Question and Answers

Q:

Why won't the vacuum belt stay on?

A:

It is always a little frustrating when an appliance or tool starts acting up. I'm sorry to hear that you are having some difficulties with your Hoover vacuum. I did some research for you at Managemylife and found an expert answer to a similar question that may help until your expert can respond to your specific question. I have attached the link below so you can check it out. I hope this helps.

Read More
James -
February 22, 2012
A:

The vacuum cleaner has 2 belts. I am not sure which one is coming off.

If the flat belt is coming off, the idler assembly that keeps tension on the belt is probably not working right. Be sure nothing is broken on the idler assembly and the torsion spring is positioned correctly.

If the v-belt is coming off something is probably worn in the agitator assembly or the bottom plate. Install the belt and rotate the agitator by hand to find what is causing the belt to come off. Be sure the pulley on the drive assembly is clean.

Read More
Jimmy K -
Sears Technician
February 23, 2012
See more answers