Model #U5470-900 HOOVER Vacuum, Upright

  • Main Body
    3 Results
  • Base Assy
    3 Results
Find part by diagram >

Question and Answers

Q:

replace power switch on hoover vavumn

A:

Many repairs require some assistance, easy or hard. Below I have attached a link that may be useful to you. I also attached the link to the Sears.com website where you can locate your local repair unit for assistance. I hope this helps!

Read More
Jackie S -
April 15, 2011
A:

Thanks for sending the model number of the vacuum.

If you will look at the parts diagram or go to Parts Direct and pull up the parts diagram there, it will make these instructions easier to follow.

Disconnect the power to the vacuum and remove screws number 5 and nuts number 48. Remove the hose holder (item 4) and the handle cap (item 1).

With the handle cap removed, you can access the switch (item 52).

Read More
Jimmy K -
Sears Technician
April 18, 2011
See more answers