Model #TXJ2066 SAMSUNG Direct View\Digital 27" to 40" TV

  • Cabinet Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

My Samsung tv keeps changing channels and there is no picture. TXJ2066 Samsung Color tv

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Marc -
May 19, 2013
A:

what does it do after it gets to channel #2 does it start over and just keep looping this or stop. is the TV new or have you had it for a while. and have you tried unplugging the TV for a little while and plug it back in.

Read More
TC -
May 19, 2013
A:

It is an old tv, bought in 2000. The kind with a glass tube. We tried unplugging and plugging it back. After channel 2 it starts again at 76. Tonight we cranked up the heat in the room and the tv worked, It must be a moisture, heat thing.

Read More
Deb -
May 19, 2013
A:

Could be and the parts for a TV that old are very hard to get if they even still exist. most TVs that old when I try to look up parts the part # comes back no longer available. even if you could get the parts the cost of repair is not worth it. when heat makes electronic components work again it is usually but not always a bad solder connection because heat makes metal expand and the contact gets tighter and when cold metal shrinks creating a loose connection on a circuit board. those old CRT tube TVs are not my expertise I mostly see nothing but flat screens because the CRT tube TVs are about extinct but that would be my guess of what is going on. I would not advise removing the back and messing around in there because those CRT tube TVs have a very high voltage that can severely injure or even kill you unless you have someone in the family that is a electronics technician.

Read More
TC -
May 19, 2013
A:

Thanks for the replies. I think you are correct on this subject of old tv's. I am not going to fix this and I think a new tv is in my future. I am finished with my questions. Thanks again.

Read More
Deb -
May 20, 2013
A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with your TV not working properly. We are here to help.  I suspect this TV has a problem with the tuner or a broken jack in the back. If the tuner does not detect a signal, the channels will keep changing. Also, since this is an analog TV, a box or cable is required to receive stations. If you are just using an antenna, it will not work. The TV stations are broadcasting in digital. However, if cable or a digital box is being used and it is working properly, I suspect the tuner is bad on the TV. Since the tuner is soldered into the main board, I recommend a technician repair the TV. I provided a link below for service. I hope this helps.

You can have it repaired at your home by a Sears Technician. You may visit SearsHomeServices.com and follow the instructions, then click on the red next now button.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Read More
John H -
Sears Technician
May 20, 2013
See more answers

Top Accessories