Model #TWX233RBW3 TAPPAN Residential Washers

  • Cover
    3 Results
  • Cabinet/top
    3 Results
  • Motor/tub
    3 Results
  • Transmission
    3 Results
  • Control Panel
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers


Why isn't the agitator moving on my Tappan model TWX233RBW3 clothes washer?


More information about what it will do would be helpful diagnosing this problem.

If the motor seems to running but the washer won't agitate or spin then the belt can be broken or the motor is bad.

If the washer will spin but won't agitate the timer is most likely the problem.

The lid switch can cause the motor not to run.

The front panel is held on by two screws located on the bottom corners of the panel. Remove the two screws and pull out on the lower part of the front panel. It is held by two clips on the top that will release when the panel is about 75 degrees open.

I hope this information helps you diagnose this problem but submit another question with any additional details for further assistance.

Read More
Fred M -
Sears Technician
October 09, 2009

Top Parts