Model #TR6 SONY Misc Television

  • No Image Available - Fidelitone
    3 Results
Find part by diagram >

Question and Answers

Q:

how do you install the governor and oil slinger on the poulan model #tr6y22cha rotary motor engine #12h802-1922-E1 PR6Y22CHA Poulan Rotary mower

A:

Thank you for your question.

 

I am sorry you are having a problem with the lawn mower. I will be happy to assist you. I put an image together showing how the slinger should be positioned.  I emailed the image to you. Once you have the slinger on the camshaft, you can reinstall the sump. The slinger should fit into the sump when positioned correctly. The sumo bolts should be torqued to 90 inch pounds.

I hope this is helpful. Please let me know if you need further assistance.

 

Thank you, Mark

Read More
Mark T -
Sears Technician
November 01, 2013
Q:

HE4T WONT DRAIN

A:

Providing a complete model number to your question will definitely help an expert better your search. If you would like to reply to this thread with a model number included I would be more than happy to assist you. Have a nice day.

Read More
Alina F. -
April 14, 2011
A:

I'm not sure how you�re checking voltage to get the 22 volts but if the pump is getting 120 volts and running but not moving any water then there is a clogged above the pump or the pump is bad.

One thing about checking voltage on these machines is you can not check voltage with the wires pulled off the pump. You will get false readings.

If you have cleared the pump filter then check the hose from the pump to the outer tub for obstructions.

With a model number you can get the pump from the following link: Sears PartsDirect .

You can reply with any additional details for further assistance.

Read More
Fred M -
Sears Technician
April 15, 2011
A:

okay, when I hook up the pump directly with a suicide cord (giving it 120 v ac) the pump runs and drains. when I messur the voltage to the pump during any cycles it has a constant 22 volts ac going to it. something is telling it not to turn on and it won't drain. it just keeps filling up. I have changed the pressure switch and the pump. like I said when I hook the pump up to 120 v from a wall socket ,it pumps and drains. The machine is level. there are no clogs and I changed out the pressue switch. here are the numbers to the machine 110.45087404 he4t

Read More
steve -
April 18, 2011
A:

The voltage to the drain pump comes directly from the control board. Before we decide on the control board there are a few additional details I'd like to know. Does the washer agitate okay? If the washer will fill and agitate then the door switches are most likely okay. This would be one of the first times for a board failure to the pump so I am skeptical. I�d check the connections on the control board. The drain pump wires are marked DP2.1 and DP2.2 .

Read More
Fred M -
Sears Technician
April 18, 2011
A:

yes the washer agitates fine I have checked the connections and they are connected to the ccu. I don't know why the voltage to the drain pump is at a constant 22 volts. it should either be on or off. is the control board seperate from the ccu? Do you think something might have shaken loose?

Read More
steve -
April 18, 2011
A:

The control board is the central control unit. You can pick one up at the SearsPartsDirect site.

Read More
Fred M -
Sears Technician
April 18, 2011
A:

Okay, I know whats wrong but I need your help. I took the cover off the ccu and found a blown transister. it makes sence because the transister would not allow the 120 to cross over and would give me the 22 v signal. also its "tr6" on the board and the pump is supposed to turn on at 006, in the diagnostics. Please I need the number to the transister. on the board its in slot "tr6" the back of the transister is blown off and I cant read it. the ccu is like 271.00. I can fix it but need that number. Can you help me?

Read More
steve -
April 19, 2011
A:

There is no part available for the control board. You can try an electronice shop/Radio Shack but I will not have a listing for part numbers on the control board.

Read More
Fred M -
Sears Technician
April 19, 2011
See more answers

Top Accessories