Model #TGDS740JQ0 ESTATE Residential Dryer

  • Top & Console/lit/optional
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
  • 8318272 Burner Assembly
    3 Results
Find part by diagram >

Question and Answers


Convert back to NAT from LP gas TGDS740JQ0 Estate Dryer


I know that it can be very difficult to have issues with your dryer. You will need to remove the LP orifice and replace it with the original Natural gas orifice. The pressure regulator most likely has a "cap screw" to remove and either take a blocking pin out; if it has no blocking pin, flip the "cap screw" over and screw back on to convert it back for natural gas. I added an image showing the gas valve and the "cap screw". Located between the two white wire harness connectors is the "cap screw" with a slotted brass or aluminum cap screw. Use a flat bladed screw driver to remove the "cap screw" flip it over and re-install the "cap screw". Adjust the air shutter as needed for the proper air to fuel mixture. It should have a blue flame with very little yellow. The other image will provide a set of basic instructions on how to convert this. If you don't feel comfortable doing this yourself, please click on the link to schedule service: Sears Home Services. Click on "Get Started" and follow the directions, click on the red "NEXT" button to continue. I hope this helps. Please feel free to let me know if you need further assistance. We are always here to help. Thank you for using

Read More
AnneJ -
Sears Technician
September 11, 2013

Top Parts