Model #TEP200VAQ0 ESTATE Free Standing, Electric

  • Cooktop Parts
    3 Results
  • Oven Door And Drawer Parts
    3 Results
  • Chassis Parts
    3 Results
  • Backguard Parts, Miscellaneous Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Estate range model tep200vaq0, how to remove & install door clip part 6610364?

A:

I think its great that you are wanting to do some repairs on your own. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.

Read More
Joseph P. -
January 11, 2012
A:

Thank you for your question and I understand your concern.

In order to access the "door clip" you will need to open and remove the oven door. I added the instructions for removing the door in the second image below.

After removing the door, remove the two (2) screws key#16 and tilt the top of the lower door out and then lift it off the two door clips. The door clip fits into the slotted areas I circle in red where key #19 is pointing. The correct position of the clip is as shown in the image. It slips and clips into the slotted channel. It should simply pull up and out.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
January 13, 2012
A:

I do not need the door replaced. I am looking for directions for the clips that fit onto the toe plate on the bottom. The clips are an odd shape and I cannot figure out where to put them, The bottom of the toe door sticks out so I ordered new parts but there does not seem to be a way to attach them?

Read More
Patricia -
January 13, 2012
A:

Patricia: I circled the clips and screws in RED. I provided instructions on how to remove the door in order to access and remove the two screws I circled in RED. The lower access panel has two clips at the bottom. Once you have the lower panel hinged open, look at the clip on the other side to see how it installs. I do not have any other instructions for accessing the clips.

Read More
Joey S -
Sears Technician
January 16, 2012
A:

I do not have either clip in the bottom of the bottom panel so do not want to take off the door until I know how to replace the lower clips. There is nothing circled in RED on the attachments sent. Would you please send them again?

Read More
Patricia -
January 16, 2012
A:

I have attached picture. I purchased two of Part #15. I hope this helps you to solve my problem.

Read More
Patricia -
January 16, 2012
A:

Here is the parts number that I ordered. # 6610364 CLIP

Read More
Patricia -
January 16, 2012
A:

Patricia: I do not know why your image does not show the parts I have circled in red. Did you in large the image. I did circle key #15 in red and yes, the door must come off in order to remove the two upper screws on the lower access panel before it can be removed. Once the lower panel has been removed you can see the slots it will fit into. The position is like the image shows that I circled in RED. The clip will fit into the slotted area. I do not have any another instructions. You may need to call a service technician if you�re not able to see how to remove and install the two clips.

Read More
Joey S -
Sears Technician
January 17, 2012
A:

Hey Patricia, I have the same issue, the two clips came off my toe panel while I was adjusting the feet on my oven. Wondering if you were able to get them back in? I am having quite a time trying to make it fit, I see the picture Joey S attached and have tried attaching them in that angle, but it just isn't working for me. Any help you can give is appreciated. Thanks

Read More
Richard -
August 26, 2012
A:

Richard: I must assume Patricia got it fixed/installed and maybe she could help and send an image. I do not have the product hear in order to take a picture of how it should mount. There is no information/images showing how the clip is installed. I hope Patricia can help by adding an image of how it fits. It appears the clip fastens to a the oven frame and the panel hangs by the hook. The clip will need to hook and pass through the openings at the upper rear of the bracket to secure the panel.

Read More
Joey S -
Sears Technician
August 27, 2012
See more answers

Top Parts