Model #T4 HORIZON Treadmill

  • Treadmill
    3 Results
Find part by diagram >

Question and Answers

Q:

deck deflector replacement 917.273373

A:

Thanks for the inquiry and for being a valued member. 

I was able to find an image showing the torsion spring orientation within the bracket and deflector. You have to hold the deflector and spring in position then slide the hinge pin in. First, you have to remove the push nut on the end of the hinge pin. Usually you have to use a pair of diagonal cutters to cut the nut off. After you have the nut off note the position of the spring. In order to install the spring and hinge rod you will need to remove the hinge bracket from the mower deck. Removing the bracket will help remove tension from the spring so that you can position the spring on the deflector and then slide the hinge rod through the spring.


Image result for Craftsman tractor deflector shield installation

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
March 27, 2015
Q:

Belt too long? 11072974103 Kenmore Gas dryer

A:

Thanks for the inquiry and for being a valued member.

Based upon the dryer model of 110.72974103, the dryer repair kit of 4392067 is the correct kit. If the belt seems too long, it is probably not routed correctly around the idler and motor pulley. I have provided an image below to show the routing of the belt. 

Image result for kenmore dryer belt routing

There are also some great YouTube videos you can watch to see how the belts are installed and routed. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
March 02, 2015
Q:

Can I use a bulb manufactured by GE to replace the cooktop/nightlite bulb under my Kenmore Microwave and can I use a 50 watt bulb for more light output? 40185053210

A:

Thanks for the inquiry and for being a valued member.

You are correct; this unit does call for a 20w halogen bulb. The watt rating on your lamp tells you how much electricity the wiring can safely accept; it would be a fire hazard to exceed that.

We would not recommend using any bulb with a higher rating than 20w. For convenience, I have linked the OEM bulb below for review and purchase if needed.

Halogen Lamp for Model 40185053210

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 


Read More
Jeff Wallace Sr -
Sears Technician
November 12, 2014