Model #T30 YAMAHA Amplifier

  • No Image Available - Fidelitone
    3 Results
Find part by diagram >

Question and Answers

Q:

Starter is loose at the engine 502251220 Craftsman Tractor

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
You are correct, this starter is mounted to the engine via 2 bolts. It's likely they are either loose or one is missing. The bolts are a Torx style, and the specific spec is T-30 1/4-20 X 15/32. If you would prefer to order a replacement bolt or two, the part number is 650990.
For convenience, I have provided a blue link below that you may click on to be directed to the SearsParts site to view and purchase the replacement bolt(s). 

Torx Starter Bolts for Model 502251220

Hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
June 10, 2014
Q:

# of Torx security bot in door hinge such as T30 253.28093800 Kenmore Elite Freezer

A:

Thank you for your question. The screws are listed as tamper proof screws and the specs listed are 1/4-20 X 5/8. The torx size is not listed but 2 common sizes are T20 and T30. I hope this will help you.

Read More
Scott D -
Sears Technician
September 12, 2013
Q:

Tablesaw fence

A:

Having to locate parts for your table saw can be difficult. While you are waiting for your expert answer, I did some research on your saw. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within two business days with detailed information. Thank you for using Manage My Life.

Read More
Priscilla V -
July 02, 2012
A:

Thank you for your question on the fence for the table saw.

I am sorry but I do not have any information as to where you may be able to find a complete fence for you table saw.

You may try some web-site woodworking tool forums on line and put in a request to see if anyone has a fence available because some other part on there saw failed.

I am sorry I was not able to help you find a replacement fence.

Sam A.

Read More
Sam A -
Sears Technician
July 05, 2012
A:

There is a replacement fence for a Craftsman 10 tablesaw it is the Delta 36-T30 30" T2 Fence System http://www.thefind.com/hardware/info-delta-t2-fence How to retrofit your saw at http://www.instructables.com/id/Retrofitting-A-Delta-T2-Fence-to-a-Craftsman-Table/

Read More
Anonymous -
March 01, 2013
A:

Anonymous, Thank you for posting the link. I am sure other users will find this helpful. Thank you for using Manage my life. Mark

Read More
Mark T -
Sears Technician
March 04, 2013
See more answers