Model #SXE7.7 HORIZON Elliptical

  • Frame Assy
    3 Results
  • Right Side Assy
    3 Results
  • Left Side Assy
    3 Results
Find part by diagram >

Question and Answers

Q:

Need elliptical part number clarification - Model SXE 7.7 Elliptical Horizon Fitness Machine

A:

Managemylife.com is always a great resource to find the answers to just about anything. I know this information can be very helpful for you to have. While you have been waiting for your expert to respond, I did some research but I was unable to locate information that would be helpful with regards to your question at this time. Your expert will be answering you within two business days but usually sooner. If you decide on service, the link is provided below.

Read More
Anna T -
January 04, 2013
A:

Thank you for your question.



I am sorry you are having a problem with this unit. To access the power outlet the console and side covers have to be removed. Once they are removed, you should be able to fish the new cable down the upright and reattach it. With the covers still off, I recommend checking the operation. If the unit lights up go ahead and reattach the side covers and console.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 07, 2013
A:

@Mark Thanks. Somehow the piece got broken, so the problem was probably caused by us � I don't think it was a defect. Is the part I noted the correct one? Just want to make sure I don't order the wrong thing. Thanks again. Jason

Read More
Jason -
January 07, 2013
A:

I believe the part you looked up is the correct part. I could not get the link you posted today because the site was down. The part number for the cable is 076821. I also talked to the tech line for Horizon and they recommend just splicing in the part that is broken. You can order the whole harness and cut the part off or see if you can find a new plug from Radio shack. Just bring the old part with you. Once you have the part, remove a few screws in the side panel so you can access the harness. Then fish out the two wires that are connected to the plug. Then connect the wires to the new plug and reassemble the unit. Please let me know if you need further assistance. Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
January 08, 2013
A:

@Mark. Thanks again. I'm assuming splicing will require some sort of soldering possibly? I'll take a look when I it taken apart and decide what I think is best. Planning to get my order in today.

Read More
Jason -
January 08, 2013
See more answers
Q:

What part does the power cord plug into on my elliptical?

A:

The console cable is the part that the power plugs into on the machine. The photo in the breakdown doesn't make that too terribly clear. The part number you need is Horizon Fitness number 076821.

Read More
XX Wade_ -
Sears Technician
June 03, 2009
A:

I have the same broken part. However, I cannot figure out how to remove the large side cover disk so I can get inside the plastic casing and replace the broken 076821. I have removed every screw, nut and bolt that I can find. What am I missing to get the disc off?

Read More
Keith -
September 06, 2012
A:

Same broken part here. I found what appears to be the part on the linked page, but it looks like that part is up at the top of the machine. Does this run with a wire all the way down to the smashed part that connects to the power adapter? @Keith, did you ever get yours replaced? How much work was it to access & install? I'm attaching a pic of the broken piece to confirm I'm talking about the correct part. Thanks.

Read More
Jason -
December 29, 2012
See more answers
Q:

Horizon SXE 7.7 elliptical, plugin on machine is broken

A:

I understand how it can be rather difficult when it comes to replacing parts on your elliptical. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Priscilla V -
September 11, 2012
A:

The crank (key AJ1, in the drawing at the link) has to come off in order for the disks to come off of this machine, if my memory serves me correct. There is a specific tool for this procedure that can be purchased from most bicycle shops and some specialty fitness shops. Without the crank removal tool, the only way to get the crank off destroys it.

Thank you for using Manage My Life!

Read More
Wade_B -
Sears Technician
September 11, 2012
See more answers