Model #SWT920WN SPEED QUEEN Commercial Washers

  • Meter Case
    3 Results
  • Control Panel
    3 Results
  • Lid Assy
    3 Results
  • Cabinet Top
    3 Results
  • Lid Switch
    3 Results
  • Valve Assy
    3 Results
  • Motor Assy
    3 Results
  • Agitator
    3 Results
  • Tub Assy
    3 Results
  • Transmission
    3 Results
  • Drain Hoses
    3 Results
  • Brake Assy
    3 Results
  • Cabinet
    3 Results
  • Blocks
    3 Results
  • Power Cord
    3 Results
  • Terminals
    3 Results
  • Tools 1
    3 Results
  • Tools 2
    3 Results
  • Harnesses
    3 Results
Find part by diagram >

Question and Answers

Q:

Speed Queen Washer - Model #SWT920WN

A:

It can be frustrating when you replaced the motor on the Speed Queen washer and you still have the same problem. There are other possibilities that can be the cause of the washer not working properly, as you will see in the link provided below. Hope this is helpful while waiting on an expert response to your specific model. If you decide to have a technician do the repair, the link is provided below also.

Read More
Anna T -
November 20, 2012
A:

Thank you for your question and I understand your concern.

The cycle begins with a wash fill. The water temperature is determined by the temperature selected. While water fills the washtub, a column of air is trapped in a pressure bulb and hose. The air pressure continues to increase as the washtub fills with water until it is great enough to activate the pressure switch. The pressure switch then causes the wash fill to stop and wash agitation to begin. However, the lid must be closed for the washer to agitate or spin.

I added a couple of images below with some troubleshooting procedures. You will likely find a faulty lid switch or the lid switch is not closing.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
November 21, 2012
See more answers
Q:

what is the age of my washer, Speed Queen SWT920WN?

A:

It is always good to know the age of your appliance. I have taken the time to research your question and noticed that someone else had asked a similar question with a response from an expert. I have attached the link below if you are interested in viewing while you are waiting on your response from an expert. Hope this helps, good luck!

Read More
Alina F. -
September 24, 2010
A:

Thank you Alina. This is very helpful for my Whirlpool appliances. I hope I can get this same info for my Speed Queen appliances.

Read More
Kopas -
September 24, 2010
A:

I'm sorry; we will need the serial number in order to tell what the Mfg date is. Please reply with the serial number for further assistance.

Read More
biker dave -
Sears Technician
September 25, 2010
A:

The model # is SWT920WN and the serial # is 1003006972. Thank you. If the full page of all dates is available (like you provided for Whilrpool), that would be very helpful.

Read More
Kopas -
September 27, 2010
A:

According to the serial number this unit was Mfg the 3rd week of 2010. I did not find the complete list.

Read More
biker dave -
Sears Technician
September 27, 2010
A:

Thank you so much!

Read More
Kopas -
September 27, 2010
A:

your WELCOME!! AND THANK U FOR THE 5 STARS!! :) WOW.

Read More
biker dave -
Sears Technician
September 27, 2010
See more answers