Model #SVE47600W JENN-AIR Slide-In Range, Electric

  • Control Panel
    3 Results
  • Top Assembly
    3 Results
  • Oven
    3 Results
  • Door
    3 Results
  • Blower Assembly (plenum)
    3 Results
  • Access Panel
    3 Results
  • Body
    3 Results
  • Wiring Information
    3 Results
  • Wiring Information
    3 Results
Find part by diagram >

Question and Answers

Q:

Need Manual for Jenn Air Oven SVE47600W SVE47600W Jenn-air Electric slide-in range

A:

Thanks for the inquiry and for being a valued member.

I was able to locate the model specific manual on Jenn-Air's site. The self-cleaning information is listed on pages 36-41. I have linked the manual below for convenience.

Jenn-Air Manual for Model SVE47600W

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
January 05, 2015
A:

Thank you! But the cleaning directions aren't working. I followed them exactly, push the Clean Pad then push a number pad with the oven door closed and nothing happens after that. The oven just displays the Clean Timed words for a few seconds and then goes back to the time display without starting the clean process. Is there something I'm missing? Or is my oven broken? If broken who is the most affordable option to fix this sort of problem? And do you know if there's a way to determine if my oven is still under warranty? I moved into this house 18 months ago and the oven came with it.

Read More
Meg -
January 10, 2015
See more answers
Q:

Jenn Air SVE47600W SVE47600W Jenn-air Electric slide-in range

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about your Jenn-Air range model SVE47600W. I am so sorry the oven has stopped working and is showing a F-code. We will be happy to help you with this but will need some additional information. Each F-code indicates a specific issue has been detected. Your question did not include the complete code number. Please resubmit your question with the model number of the range and the F-code(s). With that information we will be able to research the problem for you. We look forward to your reposted question and the opportunity to assist you with the issue. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
October 18, 2014
Q:

Jenn-Air range Model # SVE47600W when I turn on 1 knob on front of stove both burners turn on

A:

Managemylife.com is always a great resource to find the answers to just about anything. I know this information can be very helpful for you to have. While you have been waiting for your expert to respond, I did some research but I was unable to locate information that would be helpful with regards to your question at this time. Your expert will be answering you within two business days but usually sooner. If you decide on service, the link is provided below.

Read More
Anna T -
January 15, 2013
A:

Based on your symptoms, it is likely that you have a stuck contact on one of the surface burner switches. Does that problem happen with both surface elements on that side or just one? If it is happening with just one burner switch then the opposite switch on that side is probably the one that has the stuck contact and will need to be replaced. If you can figure out which switch is bad using this information, then you can order parts on this page: Jenn-Air Range Model SVE477600W Parts . Be sure that you shut off the house circuit breakers for the range before accessing internal components and replacing parts.

If you need more help, reply with additional details and we will assist you further.

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
January 17, 2013
A:

Thank you so much for the reply. When this happened a spark actually came out from behind the knob. The time display on front went out and it tripped the breaker. The farthest left knob on the front control panel now does nothing when turned on or off. The knob right next to it works but both surface elements lite up. The other side of the stove works fine and the display is also working. Are there instructions to remove the front control panel that come with ordering the part?

Read More
Joanie -
January 17, 2013
A:

That far left control switch is probably shorted out and will need to be replaced. The replacement part will normally not include instructions for installation. We normally provide that type of help here on this website. Be sure that you shut off the house circuit breakers for the range to completely disconnect electrical power before accessing internal components. I posted the procedure for accessing and replacing an infinite burner control switch in the image below. Your range may look slightly different than the one show in that image but the basic repair procedure should be the same. That information should help you complete that repair. Note: Due to the nature of your failure in that burner switch, I recommend that you carefully check the wiring in that left element circuit for damage. If insulation on wires is burned or damaged, then you will probably need to replace some wiring. A service technician would also check the circuits for the surface elements on that side of the range for any shorts to the metal cabinet. If you need help with those additional tasks, let us know. If you suspect that you have problems and need to have a service technician examine the range, then you can use the link that I provided in the above response to schedule service.

Read More
Lyle W -
Sears Technician
January 18, 2013
A:

I am showing that the part number for that burner switch is 703650 in case you need to verify that information.

Read More
Lyle W -
Sears Technician
January 18, 2013
A:

I think I am going to order the part and have a tech out to instal it also have him check the insulation on wires in case they are burned or damaged. You stated that I probably need to replace the far left burner switch. Do you think the other burner switch on the same side of the stove needs replaced as well since both surface elements light up together? In other words should I order 2 burner switches? I see that the screws for the burner switches are seperate on the parts discription are $5 each. Eeks, I wonder if I need to order those as well? I think that would be total 4 screws and it says they are not returnable.

Read More
Joanie -
January 20, 2013
A:

There is a possibility that you may need both burner switches but it is fairly rare for 2 switches to fail at the same time (unless there is a short to the metal cabinet in the wiring). The reason that you may only need to replace one switch is that the voltage supply for the bad switch is connected in a manner such that it will get voltage through the stuck contact when the other burner is turned on. The technician will be able to examine the wiring and the other switch to determine whether it needs to be replaced. I hope that this additional information helps. If you need more assistance, let us know.

Read More
Lyle W -
Sears Technician
January 21, 2013
See more answers

Top Parts