Model #SU146 JENN-AIR Slide-In Range, Electric

  • Control Panel
    3 Results
  • Door
    3 Results
  • Access Drawer
    3 Results
  • Top Assembly
    3 Results
  • Body
    3 Results
  • Internal Controls
    3 Results
  • Oven
    3 Results
  • Blower Motor
    3 Results
  • Blower Motor (convection)
    3 Results
Find part by diagram >

Question and Answers

Q:

After cleaning keeps beeping SU146 Jenn-air Electric slide-in range

Q:

my JennAir stove beeped and showed the code "F10". What does this mean?

A:

Managemylife.com is a great place to find the answers to just about anything, especially on appliances. I would suggest that you provide a little more information such as the make and complete model number of your product so your expert will be able to provide you the best possible answer. Just click on reply below where you can provide the additional information.

Read More
Yadira B -
October 29, 2012
A:

Without a model number for the JennAir stove, it is difficult to provide accurate information about that F10 code. Generally, that F10 on a JennAir range indicates that you have a problem with the electronic control board. Reply with that model number and we should be able to provide more specific information and troubleshooting tips.

Read More
Lyle W -
Sears Technician
October 31, 2012
A:

The model # is SU146; serial #798941BD 12.7kw The control panel was replaced some years ago.

Read More
Jean -
October 30, 2012
A:

Hello Jean. Thanks for posting that model number. On that range, the F10 code indicates that the main control circuit board detects an open coil on one of the element relay circuits. This range has a separate relay control board. That separate circuit board houses relays that supply voltage to the oven elements. That relay circuit board (part Y04100260) is circled in red on the parts diagram below. You will normally need a service technician to access and check the wiring connections on those control boards. If you want to attempt a do-it-yourself repair, you can shut off the house circuit breakers for the range and open that console. You may have replaced that control panel yourself in that previous repair. If you did not complete that repair or observe the repair, then you may need the information shown in the second image. That shows some access information that may help you. You will need to open the console to access that main control board and the relay control board. It appears that the control console is secured by screws on the side and the bottom of the console. Open the oven door to access the bottom screws. Pull the range out to access the side screws. Once you open up that console, you should be able to access the main control board and that relay control board. If the wiring connections are okay, then you will probably need to replace that relay control board to fix this problem. You can order that relay control board from this page: Relay Power Board for JennAir Range Model SU146 . Be sure that the house circuit breakers for the range are shut off before accessing internal components in the range. (Continued)

Read More
Lyle W -
Sears Technician
October 30, 2012
A:

If you get to the point where you need to have a service technician examine and repair the range, you can schedule service through this link: Sears Home Services . If you need more help, let us know.

Read More
Lyle W -
Sears Technician
October 30, 2012
See more answers

Top Parts