Model #STR-DE485 SONY Receivers

  • Cabinet Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Sony receiver, model STR-DE485 wont stop on radio station when scanning, but if you manually stop it gets reception

A:

I can understand your frustration over your radio not operating properly. While you are waiting for your expert answer, I did some research on the unit. At this time, I was unable to locate information that would be helpful in regards to your question. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner.

Read More
Julio -
June 14, 2013
A:

Hello Mark,

 

I'm sorry to hear that your tuner is not stopping on auto scan and I would like to assist you.  Be sure that you have an antenna connected according to the owner's manual.  If the station is not coming in strong enough, the auto tuner will not stop.  The received station must be above a certain threshold before the tuner will stop and if the antenna is not connected properly or the reception area is poor, it would be normal for the scan to keep going even though there may be stations available.

 

Please let me know if you would like any further assistance.

 

Jerry C 

Read More
Jerry C -
Sears Technician
June 17, 2013
See more answers