Model #STG5 PANASONIC Misc Audio

  • No Image Available - Fidelitone
    3 Results
Find part by diagram >

Question and Answers

Q:

Auger/impeller will not turn

A:

I can understand how much it is an inconvenience when your appliance is not working correctly. I was able to locate a similar issue on this website, i placed the link down bellow i hope that it's helpful. I also placed the parts diagram on the other link, just in case you are you are needing to order parts.

Read More
celene -
November 28, 2010
A:

Thank you for your question.

If the auger and the impeller are not turning, I would suspect a belt issue. I have provided you with the instructions below for accessing the belt. The image also has the instructions for replacing the belt.

If the augers turn but the impeller does not the problem would be the roll pins that secure the impeller to the shaft is sheared. You have to remove the whole auger assembly out of the blower housing to install new roll pins.

If the impeller is turning but the augers are not I suspect the shear, pins are sheared. The second image shows how to replace the shear pins. If the shear pins are fine, the problem would be a sheared gear in the gear case between the augers. The whole assembly has to come out to replace the auger gear.

Once you find the problem, add the details below and I can give you the instructions to repair the problem. Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
November 30, 2010
See more answers