Model #SF385PEGZ1 WHIRLPOOL Free Standing, Gas

  • Cooktop
    3 Results
  • Control Panel
    3 Results
  • Manifold
    3 Results
  • Chassis
    3 Results
  • Drawer And Broiler
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

I have a Whirlpool "Gas" Range M#SF385PEGZ1, S#RH7500547 where the harness for the burners needs to be replaced. (Part #8272949) Burners won't light.

A:

I understand the challenge of having to work on getting your range repaired. I have done some research on the Manage MY Life website and have located a link similar to your issue. While you are waiting for a detailed reply from an expert I have provided the link below. Hope this helps!

Read More
Priscilla V -
April 17, 2012
A:

I provided a basic procedure for replacing the burner switches and wiring harness for that range in the images below. Your range will be slightly different than the one shown below. The basic repair procedure should be the same. Be sure that you unplug the range and shut off the gas supply before beginning that procedure. You will need to remove the burner heads and lift that range top. Access the switches in that console to replace those components. You will need to locate the spark module. The 4th image shows the typical location of components in that type of range. That information may help you find the spark module in your model.

I hope that this information helps. If you need more assistance, reply with additional details and we will assist you further.

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
April 18, 2012
A:

Here is the 4th image.

Read More
Lyle W -
Sears Technician
April 18, 2012
See more answers

Top Parts