Model #SF377PEGB1 WHIRLPOOL Free Standing, Gas

  • Cooktop
    3 Results
  • Control Panel
    3 Results
  • Manifold
    3 Results
  • Chassis
    3 Results
  • Drawer & Broiler
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers


We have WHIRLPOOL MODEL #SF377PEGB1 ?gas oven. Its light bulb does not light up. We have checked the bulb and the socket. They seem to be OK. So what coul


Having an appliance we use daily to start having issues can be really concerning. While you are waiting on an expert to answer your question, I suggest you set service with a Sears technician. I have attached the link below. Have a nice day!

Read More
Dezeray -
July 17, 2012

Thank you for your question and I understand your concern.

If you're certain the center contact in the center of the bulb socket is making contact with the center contact point on the light bulb, I suspect a faulty door switch or a disconnected wire in the light circuit. Be sure to confirm the light bulb is good by putting it into a lamp.

I would first try this; unplug the range and then remove the light bulb. Reach into the light bulb with a finger and bend the center contact outwards a little and then reinstall the light bulb. Plug the range cord into the power source and open the door. If the light bulb does not work, it likely has a faulty door switch or a disconnected wire in the light circuit.

I added an image below of the wiring diagram and the oven light circuit.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
July 19, 2012
See more answers

Top Parts