Model #SF369LEMT0 WHIRLPOOL Free Standing, Gas

  • Cooktop Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Manifold Parts
    3 Results
  • Chassis Parts
    3 Results
  • Drawer & Broiler Parts
    3 Results
  • Door Parts, Miscellaneous Parts
    3 Results
Find part by diagram >

Question and Answers


How do I disconnect the power supply cord in order to replace it?


First, pull the range out and look at the power cord to see if it has a quick disconnect plug. You may just have to disconnect the harness plug and remove a small cord clamp in order to remove the power cord. Reverse the procedure to install the new power cord.

Or you may have to remove the rear upper cover behind the control panel and follow the power cord to a quick disconnect harness plug and disconnect the power cord from the harness plug. There will also be a green ground wire attached to the metal frame with a screw. Remove the screw and the green ground wire. There may be a molded portion on the power cord that you will need to work out of the opening where the power cord enters the rear panel and a power cord clamp to remove.

Reverse the procedure to install the power cord.

Read More
Joey S -
Sears Technician
April 24, 2009

Top Parts