Model #SF114PXSQ1 WHIRLPOOL Free Standing, Gas

  • Cooktop Parts
    3 Results
  • Backguard Parts
    3 Results
  • Manifold Parts
    3 Results
  • Chassis Parts
    3 Results
  • Oven & Broiler Parts
    3 Results
  • Door Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

Whirlpool gas oven does not always start SF114PXSQ1 Whirlpool Free standing - gas

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is problems with the oven.
 
Glad to help out.   Im  looking at your Whirlpool Oven model number SF114PXSQ1.

Your oven has only one ignitor and that is the item to check first.  

How to test gas ignitors for ranges:
 
1.  Unplug the oven from the wall for your safety.
 
2.  Lower the oven door.  Sometimes best to have more room and just remove it.
 
3.  Remove the oven racks from inside.  Remove the lower panel when testing the bake ignitor.
 
4.  Remove the burner shield by taking out the screws that secure it to ignitor first.
 
5.  Next take out the screws that hold the ignitor.  Pull the ignitor away from the oven wall.
    Unclip the wire connector.  If the wire connector is not accessible, remove the back rear
    panel to the oven, or remove the bottom storage drawer to access the wire connector.
 
6.  Get a multimeter to the lowest setting so you can measure the Ohms of resistance.  Calibrate
    the meter. Refer to your meters instructions 
 
7.  Place one of the terminals on the ovens bake ignitor's terminal with one of the multimeters 
    probes.  Then touch the other terminal with the other probe.
 
8.  Check the multimeter's display  If the meter does not move, displaying a resistance of any 
    numbers on the Ohms of resistance, there is no continuity.   If no continuity then the bake 
    ignitor is bad.

Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
May 28, 2014
Q:

Gas oven SF114PXSQ1 Whirlpool Free standing - gas

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
May 13, 2014
Q:

F5 code then F2 on oven SF114PXSQ1

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
The F2 code indicates that you have a stuck key or a problem with the ribbon wire connection between the control panel key pad and the electronic control board in the console.
Possibly when you replaced the panel, the electrical ribbon wasn't secured completely and is loose. The best thing would be to disconnect power and open up the console and check the connections.
Hope this helps and thanks for using SearsPartsDirect.com. 

Read More
Jeff Wallace Sr -
Sears Technician
May 13, 2014

Top Parts