Model #SF111PXSQ1 WHIRLPOOL Free Standing, Gas

  • Cooktop Parts
    3 Results
  • Backguard Parts
    3 Results
  • Manifold Parts
    3 Results
  • Chassis Parts
    3 Results
  • Oven & Broiler Parts
    3 Results
  • Door Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

Whirlpool oven not heating up

A:

I'm sorry to hear that you are having some difficulties with your oven. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assist you.

Read More
Barbara H. -
January 14, 2012
A:

Your symptoms do point to a failed igniter as the cause of this problem. A weak igniter will glow but may not heat enough so that its resistance decreases to a point where enough current flows through the circuit to the safety gas valve. This will prevent the burner from igniting. The theory of operation for that oven burner ignition system on your range is shown in the image below. Based on your description, it is likely that you can fix this problem by replacing that igniter. You can order that part from the Sears PartsDirect website.

NOTE: Your model number (SF111PXQ1) appears to be slightly off (missing a letter). If you have the model SF111PXSQ1 then the part number for the igniter will be 98005652. If you have a different model, I recommend that you verify that part number based on your exact model.

Be sure that you unplug the range and shut off the gas supply before accessing and replacing that igniter.

If you need more help, reply with additional details and an updated model number.

If you get to a point where you need to have a service technician repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
January 16, 2012
See more answers

Top Parts