Model #SD208 PANASONIC Misc Audio

  • No Image Available - Fidelitone
    3 Results
Find part by diagram >

Question and Answers

Q:

Where can I buy a dado throat plate for this model and will Freud SD208 dado set work with this modle? 315228410 Craftsman Table saw

A:

Finding the throat plate that works with your table saw could be a challenge. I added a link below to Sears Parts Direct, a representative may be able to assist you in locating the throat plate that works best with your table saw. Hope this helps.

Read More
Yadira B -
November 13, 2012
A:

Thank you for your question on the dado blade insert for the table saw to fit the Freud Dado blade SD208. This is an 8 inch dado blade so the insert for the table saw has to be for an 8 inch dado blade.

I have listed the correct dado blade insert for the table saw model 315.228410 in the link below.

http://www.searspartsdirect.com/partsdirect/part-number/22290/0009/009&pathTaken=partSearch&blt=14&prst=0&shdPart=22290?sid=MMLxexpertxmerch] .

I hope this will help.

Sam A.

Read More
Sam A -
Sears Technician
November 14, 2012
See more answers
Q:

Can I use an 8" (Freud SD2098) dado blade on my Craftsman Table saw Model 315.228490?

A:

Hello, We received your question, we need further time to assist you better. An expert will respond to your question within the next 24 to 48 hours with an accurate answer. Thank You!!!!

Read More
Raquel F -
August 11, 2010
A:

Thank you for your question.

  • It appears that you corrected your Model number to what I referenced in your last inquiry.

  • I do believe it will fit, however the owners manual only recommends a 7 inch dado blade. The problem is the dado table insert has a limited range of how high you can raise the blade into the work and the 8 inch diameter may not allow you to get the blade height high enough for what you may require for your project with out hitting the blade table insert.

Read More
Sam A -
Sears Technician
August 12, 2010
See more answers
Q:

Power Tools

A:

I can see your concern on if you can use an 8" dado blade on your Craftsman Table Saw. We highly suggest that you follow manufactures guidelines. An expert will respond to this question within the next 24 to 48 hours with an accurate answer! Thank You!!!

Read More
Raquel F -
August 11, 2010
A:

Thank you for your question.

  • I cannot verify the model number you gave.

  • I think it should be a 315.228490, which is a 10 inch cast iron table top table saw.

  • However if the model number you gave is correct, I would only use the size dado blade that is recommended in the owners manual.

Read More
Sam A -
Sears Technician
August 12, 2010
See more answers