Model #SCS3014LQ02 WHIRLPOOL Counter Unit, Gas

  • Cooktop, Burner And Grate Parts
    3 Results
  • Burner Box, Gas Valves, And Switches
    3 Results
Find part by diagram >

Question and Answers

Q:

Whirlpool Cooktop Mod #SCS3014LQ02 SCS3014LQ02 Whirlpool Counter unit - gas

A:

Thank you for choosing Sears Parts Direct. I can certainly assist you in locating the ignitor for your cooktop. I did look into the model number you have provided and I have found information that will assist you.
I was able to locate the spark module for your unit. It is the same thing as an ignitor. Click here to view.  You can also view parts on searspartsdirect.com.

Let me know if you have any other questions. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.
 
 
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services.

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
April 17, 2014
A:

Thank you for the reply. I installed that part (new) a few months ago and the stove still isn't igniting as quick as it should. I was looking at the spark electrode with a part number similar to (Whirlpool Y0316773 Electrode). These are the individula ignitors for the burners. Thanks again for the quick response.

Read More
Tony -
April 17, 2014
See more answers
Q:

whirlpool cooktop SCS3014LQ02

A:

I can see that all burners igniting would be a concern. The expert will review and respond, usually within two days. If you decide a technician would help, the Sears Home Services link below can help.

Read More
Barbara -
September 23, 2012
A:

Barbara, dont get confused. All 4 burners DO NOT ignite they just have spark to them. Only the burner being turned on ignites. All 4 have spark to them!

Read More
steve -
September 24, 2012
A:

Thank you for your question and I understand your concern.

Whenever any one burner knob is rotated to the light position, all 4 electrodes will begin sparking. This is normal operation.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
September 25, 2012
See more answers
Q:

RE: whirlpool conversion kit for model number scs3014lq02 from sears parts direct....i received parts, but it DOES NOT include the black orifice for the front l

A:

When looking to find some parts on an appliance, Manage My Life is here to help. While you are waiting for your expert answer, I did manage to find a link in where you can enter your appliance model number and a parts list diagram will pop up. I hope my link is useful.

Read More
Joseph P. -
August 16, 2011
A:

A qualified installer should convert this range to LP gas.

The LP orifice for the 11,000 BTU burner should have markings such a 94 L and III. Your details seem to indicate that you have the instructions for that LP conversion kit. The instructions may have information about the markings on those LP orifices. If it does, then you may be able to determine which orifice to install on that burner using that information. The LP conversion instructions are listed as a separate part in the parts list but that replacement part is no longer available. Without those instructions, it may be difficult to complete this conversion. I do not have that document available online. We may be able to help you further with this conversion but we would need information about the markings on your remaining orifices to possibly help you determine which orifice to install on that left front burner. Reply with additional details about those orifices if you need more help.

You can contact your local gas supplier for a qualified installer. You may also be able to find a service provider in your area through the ServiceLive.com website. Here is a link for that website that has pre-screened service providers: ServiceLive.com .

Read More
Lyle W -
Sears Technician
August 18, 2011
See more answers

Top Parts