Model #S120-C JENN-AIR Free Standing, Electric

  • Control Panel Assembly (s120)
    3 Results
  • Control Panel Assembly (s120-c) (s120-c)
    3 Results
  • Top Assembly
    3 Results
  • Internal Controls
    3 Results
  • Internal Controls (s120-c)
    3 Results
  • Body (s120)
    3 Results
  • Basic Body Assembly (s120-c) (s120-c)
    3 Results
  • Oven
    3 Results
  • Cooling Fan (s120) (s120)
    3 Results
  • Cooling Fan (s120-c) (s120-c)
    3 Results
  • Blower Assembly
    3 Results
  • Door (s120)
    3 Results
  • Door (s120-c) (s120-c)
    3 Results
Find part by diagram >

Question and Answers

Q:

JennAir Range back splash light S 120 Electric Range

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your oven and I do understand your frustration. Glad to help out. I'm looking at your model number s120-c and the light bulb is toward the rear of the oven. You will need to remove the clip that over the light lens items 32. The part number for the bulb is 771133. Our system indicates that the original manufacturer no longer has it available. Here is a link for a video that may help as well.  Just click the blue link above to be taken to the page. I trust this information will help you.
 
Thank you for choosing Sears PartsDirect.com.
 
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
December 27, 2014
A:

That (oven light) wasn't my question. I want to put a new bulb into the backsplash piece that sticks up from the back of the range. It has a glass screen measuring about 4 inches high and 30 inches wide with (I think) a fluorescent bulb behind it ) I can't open the space where the bulb is .

Read More
Carl -
December 28, 2014
See more answers