Model #RZT50 TROYBILT Lawn, Riding Mower Rear Engine

  • Frame Assembly
    3 Results
  • Wheel Assembly
    3 Results
  • Seat Assembly
    3 Results
  • Switches/solenoid
    3 Results
  • Seat Box Frame/console
    3 Results
  • Lapbar/deck Lift
    3 Results
  • Deck - Model Rzt42
    3 Results
  • Deck - Model Rzt50
    3 Results
  • Clutch/fuel Tank - Model Rzt42
    3 Results
  • Clutch/fuel Tank - Model Rzt50
    3 Results
  • Transmission Assy-rzt42 & Rzt50
    3 Results
Find part by diagram >

Question and Answers

Q:

I have a problem with my zeroturn lawnmower Model number Cub cadet rzt 50

A:

I'm sorry to hear that you are having some difficulties with your Zero-turn Lawn Mower. I did some research for you at Managemylife and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below.

Read More
James -
December 28, 2011
A:

I don't show this model to have a separate wheel motor from the transmission. This shows to have a transmission unit for each wheel, so there is a left and right transmission that the wheels attach directly to.

If you can describe for me what is happening when you try to drive we may be able to determine the cause. In many instances it's just a matter of low transmission oil or a sticking bypass lever on one of the transmissions.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
December 29, 2011
See more answers
Q:

having problem with zero turn mower

A:

Managemylife.com is a great place to find the answers to just about anything. I would suggest that you provide a little more information such as the make and complete model number of your product so your expert will be able to provide you the best possible answer. Just click on reply below where you can provide the additional information.

Read More
Alina F. -
December 13, 2011
A:

I'm sorry to hear that you are having some difficulties with your Mower. I did some research for you at Managemylife.com and found expert answers to similar questions that may help until your expert can respond to your specific question. The links are attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assist you.

Read More
Priscilla V -
December 13, 2011
A:

Since the right side is working, we know the belt is good. On the back of the machine you should find the "bypass" rod for each transmission. On the left side (not working side) follow that rod up to where it connects onto the transmission and make sure it's connect and able to move the little lever on the transmission. Make sure the rod is moved to the position for drive and not into the bypassed position.

If all that looks good, there may very well be a problem within the transmission. Pull the bypass rod into the bypass position on the offending side. Start the engine and run it up to full throttle. Now move the left stick forward for about 3-4 seconds and then bring it back to the full reverse position for about 3-4 seconds. Cycle the stick back and forth about 6-10 times. Then put the transmission back into the drive position and do the same thing. If the transmission starts moving it's just a matter of an air bubble in the transmission that needed to be purged out.

Let me know what you find.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
December 14, 2011
See more answers

Top Parts