Model #RST399UL CALORIC Free Standing, Gas

  • Main Top/oven Assembly
    3 Results
  • Oven Cabinet Assembly
    3 Results
  • Lower Oven Door Parts
    3 Results
  • Storage Drawer Parts
    3 Results
  • Upper Oven Door Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Upper Oven Parts
    3 Results
  • Sealed Burner Parts
    3 Results
  • Gas Components
    3 Results
  • Electrical Components
    3 Results
  • Vent Hood
    3 Results
Find part by diagram >

Question and Answers

Q:

Why won't any of the spark electrodes work?

A:

If you hear a faint pulsing/clicking type noise and there is no sparking between any of the electrodes (key#1) and burner caps, the electrode wires could be pinched or the voltage is arcing between the electrode wires and ground. A bad ground or no ground can cause it to not spark at the electrodes and cause it to jump spark to ground somewhere in the electrode wires. It could also be a weak spark module too. NOTE: The burner caps must be in place for the spark electrodes to work.

I added some information in the images below.

Read More
Joey S -
Sears Technician
May 05, 2009