Model #RGB745WEA2WW HOTPOINT Free Standing, Gas

  • Gas & Burner Parts
    3 Results
  • Control Panel & Cooktop
    3 Results
  • Body Parts
    3 Results
  • Door & Drawer Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Where can I find a replacement for a discontinued part RGB745WEA2WW Hotpoint Gas range

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your range. Upon researching model RGB745WEA2WW; the  drip pan is no longer available, we do not have a substitution part to replace the drip pan.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
June 16, 2015
Q:

oven alarm goes off RGB745WEA2WW Hotpoint Gas range

A:

Thank you for choosing SearsPartsDirect.com. Thank you for your question. I am sorry to hear that your range is giving you error codes. I know that cannot be any fun.
F2 (During Bake) -Oven Control Senses Oven Temperature Above 615F-630F - If temperature has exceeded 615F-630F, check for welded contacts on bake and broil relays. If present, replace control board (clock). If temperature has NOT exceeded 615F-630F, check sensor, sensor harness, and the sensor harness connection at sensor and oven control. If found defective, replace sensor. Also check for any causes of high resistance in the oven temperature sensor circuit.


F2 (During Clean) -Oven Control Senses Oven Temperature Above 915F-930F - If temperature has exceeded 915F-930F, check for welded contacts on the bake and broil relays. If present, replace control board (clock). If temperature has NOT exceeded 915F-930F, check sensor, sensor harness, and the sensor harness connection at sensor and oven control. If found defective, replace sensor. Also check for any causes of high resistance in the oven temperature sensor circuit.

F3 / F4 -Open or Shorted Oven Temperature Sensor (RTD) - Check sensor harness and connection between oven sensor and oven control. If wiring is okay, replace control board (clock).

The F2 & F3 error codes both mention the temp sensor. The temp sensor is mounted inside the oven cavity & regulates the oven set temperature. If the temp sensor fails the oven could overheat. This is what generates the error codes. I recommend having the temp sensor checked with an ohm meter, at room temperature the sensor should ohm out at approx 1100 ohms.

If you do not feel comfortable making the repair yourself, I recommend a technician go out to your home.
If you would like a Sears technician to complete the repair, you can set up service at www.SearsHomeServices.com or by calling 1-800-469-4663.

I hope this helps you. Have a great day!

Read More
Samantha A -
Sears Technician
May 21, 2014
Q:

Why does my oven alarm go off? RGB745WEA2WW Hotpoint Gas range

A:

Thank you for choosing SearsPartsDirect.com. Thank you for your question. I am sorry to hear that your range is giving you error codes. I know that cannot be any fun.
F2 (During Bake) -Oven Control Senses Oven Temperature Above 615F-630F - If temperature has exceeded 615F-630F, check for welded contacts on bake and broil relays. If present, replace control board (clock). If temperature has NOT exceeded 615F-630F, check sensor, sensor harness, and the sensor harness connection at sensor and oven control. If found defective, replace sensor. Also check for any causes of high resistance in the oven temperature sensor circuit.


F2 (During Clean) -Oven Control Senses Oven Temperature Above 915F-930F - If temperature has exceeded 915F-930F, check for welded contacts on the bake and broil relays. If present, replace control board (clock). If temperature has NOT exceeded 915F-930F, check sensor, sensor harness, and the sensor harness connection at sensor and oven control. If found defective, replace sensor. Also check for any causes of high resistance in the oven temperature sensor circuit.

F3 / F4 -Open or Shorted Oven Temperature Sensor (RTD) - Check sensor harness and connection between oven sensor and oven control. If wiring is okay, replace control board (clock).

The F2 & F3 error codes both mention the temp sensor. The temp sensor is mounted inside the oven cavity & regulates the oven set temperature. If the temp sensor fails the oven could overheat. This is what generates the error codes. I recommend having the temp sensor checked with an ohm meter, at room temperature the sensor should ohm out at approx 1100 ohms.

If you do not feel comfortable making the repair yourself, I recommend a technician go out to your home.
If you would like a Sears technician to complete the repair, you can set up service at www.SearsHomeServices.com or by calling 1-800-469-4663.

I hope this helps you. Have a great day!

 

Read More
Samantha A -
Sears Technician
May 21, 2014

Top Parts