Model #RF368LXPB2 WHIRLPOOL Free Standing, Electric

  • Cooktop Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Chassis Parts
    3 Results
  • Drawer & Broiler Parts
    3 Results
  • Door Parts, Optional Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Our Oven

A:

It can be a real headache when your oven constantly trips the breaker in your home. I did some research and provided a link to a similar question and answer on our site. I hope this will shed a little more light on the issue until the Expert responds to your question in more detail within 24 to 48 hours.

Read More
Julio -
March 25, 2013
A:

Thank you for your question. I can understand your concern about the breaker. This type of problem will be caused by a short in the range or a weak breaker. If the range is plugged into a wall outlet, a good check will be to disconnect the power cord. Now, try to reset the breaker with the range disconnected. If the breaker still won't reset, it means the breaker has failed and will need to be replaced. An electrician will be needed, to make this type of repair. If the breaker will reset, now reconnect the range and if the breaker trips, it means there is a short in the range. A technician may need to make this type of check, to locate the short. Now, if the breaker remains set after the range is plugged in but trips again after the range has been in use for awhile, it will indicate the breaker is weak and will need to be replaced. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services.

Read More
Scott D -
Sears Technician
March 27, 2013
See more answers
Q:

My Oven

A:

I can understand your frustration over your oven tripping the breaker in your home. I would suggest that you provide a little more information such as the make and complete model number of your product, so your expert will be able to provide you with the best possible answer. Just click on reply down below, where you can provide the additional information.

Read More
Julio -
March 25, 2013
A:

Sorry, I forgot that info. It's a Whirlpool Model No. RF368LXPB2

Read More
Kelly -
March 25, 2013
A:

Thank you for your question. I can understand your concern about the breaker. This type of problem will be caused by a short in the range or a weak breaker. If the range is plugged into a wall outlet, a good check will be to disconnect the power cord. Now, try to reset the breaker with the range disconnected. If the breaker still won't reset, it means the breaker has failed and will need to be replaced. An electrician will be needed, to make this type of repair. If the breaker will reset, now reconnect the range and if the breaker trips, it means there is a short in the range. A technician may need to make this type of check, to locate the short. Now, if the breaker remains set after the range is plugged in but trips again after the range has been in use for awhile, it will indicate the breaker is weak and will need to be replaced. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services.

Read More
Scott D -
Sears Technician
March 27, 2013
See more answers

Top Parts