Model #RF262LXST0 WHIRLPOOL Free Standing, Electric

  • Cooktop Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Chassis Parts
    3 Results
  • Drawer & Broiler Parts
    3 Results
  • Door Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

Lost power and now oven/stove won't work.

A:

A non working Range is not something any of us want to see. If you are technically handy, this is a good site to get instruction and fix some things yourself. If you do not feel confident doing your own repairs, an option is to visit Sears Home Services and use the scheduler. While you wait for the expert to review your model, you can check the bottom link for some possibilities. Hope this is of help.

Read More
Priscilla V -
August 16, 2011
A:

Thank you for your question and I understand your concern.

If the surface elements do not heat and the clock and is dead I would have to assume your range is not getting the proper voltage supply. There should be two circuit breakers dedicated for the range. You may want to try resetting them again by flipping them both off and on 2-3 times and then see if the range will operate.

If it's still dead then the voltage supply will need to be checked at the back of the range where the power supply connects. The voltage should measure 220-240 volts when measuring across the two outside terminals and it must measure 110-120 volts when measuring across the center terminal to each outside terminal.

NOTE: I do NOT recommend checking and verifying voltage unless you have experience and you feel safe and confident in doing so; otherwise I recommend calling a service technician to diagnose and repair your appliance.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
August 17, 2011
See more answers

Top Parts