Model #RF196LXKT0 WHIRLPOOL Free Standing, Electric

  • Cooktop/literature
    3 Results
  • Control Panel
    3 Results
  • Chassis
    3 Results
  • Door
    3 Results
  • Drawer And Broiler
    3 Results
Find part by diagram >

Question and Answers

Q:

What would have failed to cause both Bake and Broil functions to quit working?

A:

If the surface burners will operate that would confirm the voltage supply to the range is OK.

I added the wiring diagram with strip circuits showing a Bake and Broil relay. The L1 voltage is supplied to P2-1 connector for half of the voltage required for the bake and broil elements and the L2 voltage is supplied directly to both elements from the L2 voltage supply.

When you set the oven to Bake or Broil and you hear the Bake or Broil relay click and energize the control board is likely OK. IF both Bake and Broil elements quit working at the same time the likely failure is a burnt wire connection on L2 side of voltage supply between the red and blue wires connect to the L2 voltage supply or at P2-1 connector on the L1 voltage supply.

I recommend calling a service technician to diagnose and repair your range.

Read More
Joey S -
Sears Technician
March 09, 2009

Top Parts