Model #REX4635EW1 ROPER Residential Dryer

  • 3 Results
  • 3 Results
  • 3 Results
Find part by diagram >

Question and Answers

Q:

electric dryer

A:

Understanding what causes a Roper Electric Dryer to take too long to dry is not that difficult when you have a website like managemylife.com to turn to. I will provide you a video and a link that may be helpful in checking on the dryer problem with heating issues while you wait for an expert response.

Read More
Anna T -
March 04, 2012
A:

Thank you for your question and I understand your concern.

If the dryer is producing heat but is taking a long time to dry, this is usually caused by a restriction in the air flow. It could have a restricted vent system or lint filter. For testing purposes only; disconnect the vent hose from the back of the dryer and dry one load. If it dries in a normal amount of time, check the venting system and the outside vent cap for kinks or restrictions. While the vent hose is disconnected; measure the exhaust temperature with a thermometer and the average temperature should be around 130-140 degrees once it reaches operating temperature.

I added an image of the wiring diagram below. I do not have a service manual.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
March 06, 2012
A:

thankss

Read More
sheets -
March 17, 2012
See more answers

Top Parts