Model #RD220 SANYO Tape Deck

  • No Image Available - Fidelitone
    3 Results
Find part by diagram >

Question and Answers

Q:

tightening pattern & torque spec for engine head 917275971 Craftsman Tractor

A:

Thank you for choosing Sears Parts Direct. I can certainly assist you in locating the tighening pattern and torque specs for your engine on your Tractor. I did look into the model number you have provided and I have found the engine Owner's Manual. The manual does state the tune up specifications. For any other specifications you will need to contact Briggs and Stratton.
Click here to view the Owner's Manual for your mower. 
The Specs are located on page 17.

Let me know if this helps. You can also visit searpartsdirect.com for parts, diagrams, and repair information.

 
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services 
Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
April 03, 2014
A:

I need the torque specs for the head bolts and the tightening pattern (5 bolts witch one get tighten 1st,2nd,3rd...) thanks

Read More
shawn -
April 03, 2014
A:

220 in lbs.  or 18 ft lbs.  You will need to start with criss cross pattern
446777-0241-E1 

Bolt torque Specifications:  Do not fully tighten the bolts the first time around as this can tilt the flange out of parallel. The first time around tighten to approximately 1/2 of the final torque, and then repeat the sequence, tightening to the suggested torque limit.

Read More
Natasha12 -
Sears Technician
April 03, 2014
See more answers