Model #RBS277PVB02 WHIRLPOOL Built-In Oven, Electric

  • Oven Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Oven Door Parts
    3 Results
  • Internal Oven Parts
    3 Results
  • Top Venting Parts
    3 Results
  • Optional Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

E2 F3 Whirlpool Wall Oven Issue

A:

I am sorry that you are having some difficulties with your range and I will be happy to help. I did some research and I was able to find a link that will provide you with some good information. Click here for the link. I hope this helps with your research while you wait for your expert response.

Read More
Joseph -
June 12, 2013
A:

Thank you for submitting your question. I understand your concern and I will be happy to assist you. Joseph has provided you with great information for the E2 F3 error code. I recommend testing the oven sensor probe for the proper continuity to ensure the part. The resistance of the oven sensor probe at room temperature should be around 1090 ohms. If the probe reads anything different, replace it (image one). If the probe test good, then replace the main control board (image two). You can order parts from our Sears Parts Direct web site. I hope this helps. Please reply back to this thread if you require further assistance. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
June 13, 2013
A:

The control board is part number W10340935 and the oven sensor probe is part number W10131825. Please ignore the control panel image above, that is for a free standing range. To replace the control on the wall oven, disconnect the power first. Then remove three screws across the bottom of the control panel and push up to release the top corners. Keep in mind how the wiring is plugged in. Taking a picture first helps and then replace the board. I hope this helps. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
June 13, 2013
See more answers

Top Parts