Model #RBS275PDQ11 WHIRLPOOL Built-In Oven, Electric

  • Oven/literature
    3 Results
  • Control Panel
    3 Results
  • Oven Door
    3 Results
  • Internal Oven
    3 Results
  • Top Venting/optional
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Is there a replacement part for my oven if the manufacturer no longer makes it? RBS275PDQ11

A:

Thanks for the inquiry and for being a valued member.

I am sorry to hear of the issue you're having with the oven turning itself on. I know how concerning that is to have happen.

I don't see a P3 error code listed for this model, but I do see an F3 error code. The "F3" fault code indicates open or shorted oven temperature sensor probe or an open or shorted oven temperature sensor harness. This could also be caused by a faulty electronic oven control. A shorted oven sensor wouldn’t cause the unit to turn on by itself, which leads me to believe it’s the board.

With your mention that the unit turns on and goes into self-clean mode, I suspect the issue is with the electronic control board. The part number is 8186024R. It would be best to have the board tested by a service technician prior to replacing it to ensure it’s the correct part to replace.

If you would feel more confident have a Sears Home Service technician help assist with the diagnosis/repair, you can call 1-800-469-4663, or click here to be directed to the page to set up service.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business.  

Read More
Jeff Wallace Sr -
Sears Technician
November 19, 2014
Q:

Not heating after Auto-Clean RBS275PDQ11 Whirlpool Built-in oven, electric

A:

Thanks for the inquiry and for being a valued member.

I am sorry to hear of the issue you're having with the oven after the self-clean. I know how frustrating that is to have happen.

I suspect that the power relay on the control board may have shorted after running the cleaning cycle. It will be difficult to say with certainty, but if the oven is not working at all, the control board would be the most likely suspect. The board would need to be tested to verify. We would recommend having a service technician help assist with the diagnosis and repair. The part number is 8186024R. 

If you would feel more confident have a Sears Home Service technician help assist with the diagnosis/repair, you can call 1-800-469-4663, or click here to be directed to the page to set up service.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 



Read More
Jeff Wallace Sr -
Sears Technician
November 11, 2014
Q:

How do I install electronic contro panel for my wall oven?

A:

I did some research on the unit and I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within two business days with detailed information. Thank you for using Manage My Life.

Read More
Joseph P. -
August 03, 2013
A:

Hi,

Thanks for contacting  ManageMyLife. I understand how frustrating it is having trouble with your appliance.

The way to gain access to the control is the first shut the power off the oven and  remove and slide the oven door trim down.  This should expose another screw, one on each side of the lower side of the control panel and you are well on the way to gaining the access.  Below is a couple of pictures showing the process.   

 

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Bill

Read More
Bill__W -
Sears Technician
August 05, 2013
See more answers

Top Parts