Model #RBD305PVS02 WHIRLPOOL Built-In Oven, Electric

  • Lower Oven Parts
    3 Results
  • Upper Oven Parts
    3 Results
  • Lower Oven Door Parts
    3 Results
  • Upper Oven Door Parts
    3 Results
  • Internal Oven Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Top Venting Parts
    3 Results
  • Optional Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How can I remove burned bulb from Whirlpool double oven ?

A:

Thank you for your question and I understand your concern.
 
I added a link to the Use and Care Guide and on page 11 it has the procedure of removing and replacing the oven cavity light. The lens cover must be unscrewed by turning it counter clockwise. It could be stuck if you're not able to turn it counter clockwise. Try tapping lightly on the lens cover with the handle end of a screwdriver and then see if will loosen and come off. You may want to try using one of those round rubber grippers used for gripping jar lids to help get a good grip on the lens cover. After removing the lens cover, turn the light bulb counter clockwise to remove.
 
The lens cover can become difficult to remove but it must come off in order to access and replace the light bulb. Disconnect the power cord from the power source before removing and replacing the light bulb.
 
If you get to the point where you need to have a service technician remove and replace the oven light bulb, you can schedule service through this link:Sears Home Services.
 

Read More
Joey S -
Sears Technician
October 21, 2013
Q:

How do I replace the thermal fuse for my oven?

A:

An oven is definitely something we depend on and when it begins to malfunction it can be a huge inconvenience. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.

Read More
aashe -
December 12, 2011
A:

Since you lost power during that clean cycle, you could have blown that control panel thermal fuse (part 4456654). I assume that the control panel is completely blank. The first image below shows the wiring diagram for that oven. The second image shows a diagram of the major components including that thermal fuse for the control. The third image shows the location and technical information on that thermal fuse. That fuse is connected to the black wire that goes to Pin 24-3 on your control board. The 4th image shows how to open the console on that type of oven. Be sure that you shut off the house circuit breakers (or remove the house fuses) to completely disconnect electrical power to the oven before accessing internal components. You can test that thermal fuse by using the procedure shown in this brief video: Thermal Fuse Testing . If that fuse is blown, you can order a new one from the Sears PartsDirect website. Here is a direct link for that part: Thermal Fuse . As noted above, be sure that you completely disconnect electrical power to the oven before accessing internal components.

This information may help you fix your oven failure. If you need more assistance, reply with additional details.

If you get to a point where you need to have a service technician repair this oven failure, you can schedule one at this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
December 14, 2011
A:

Here is the 4th image.

Read More
Lyle W -
Sears Technician
December 14, 2011
See more answers

Top Parts