Model #RBD245PDB12 WHIRLPOOL Built-In Oven, Electric

  • Lower Oven/literature
    3 Results
  • Upper Oven
    3 Results
  • Lower Oven Door
    3 Results
  • Upper Oven Door
    3 Results
  • Internal Oven
    3 Results
  • Control Panel
    3 Results
  • Top Venting
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

double ovens won't shutoff except with cook timer RBD245PDB12 Whirlpool Electric oven

Q:

I have a Whirlpool #RBD245PDB12 doubel oven that is not working, the control panel has no power or lights, I have checked the circut breaker and it seems good.

A:

I know how important it is to have your range working properly at all times. I researched your question and was able to find a previous post that includes helpful information on this type of issue. I attached the link below. I hope this helps.

Read More
Jackie S -
February 05, 2012
A:

Thank you for your question and I understand your concern.

If the oven is getting the proper voltage (220), it could have a faulty electronic oven control or the thermal fuse connected in series with the L1 (line one) voltage supply to the electronic range control has failed.

If the range went dead during a self cleaning cycle, the thermal fuse has likely tripped. This can happen if the blower motor is not operating correctly or because the hot air from the front of the oven is being drawn into the control panel because of a leaking door seal. The thermal fuse will need to be replaced with kit #4451042. I strongly suggest calling a service technician to properly diagnose repair your double wall oven.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
February 06, 2012
See more answers
Q:

Oven Whirlpool model rbd245pdb12 error code f2 e6. What does this mean?

A:

The Oven is definitely something we depend on and when it begins to malfunction it can be a huge inconvenience. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.

Read More
Priscilla V -
December 12, 2011
A:

I see Pvalde2 provided you with great information on the F2 E6 error code. You can try resetting the unit by disconnecting it from the outlet or by switching off the designated circuit breaker for 20-30 minutes, then restore the power. If the reset doesn't work, one one of the parts mentioned in the first link provided by Pvalde2, will need to be replaced. Parts can be purchased from Sears PartsDirect . If you do not feel comfortable repairing this issue yourself, service can be scheduled at the following link: Sears Home Services . I hope this helps.

Read More
Korinna S -
Sears Technician
December 13, 2011
See more answers

Top Parts