Model #RAB5133DW0 ROPER Residential Washers

  • Top And Cabinet
    3 Results
  • Controls And Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Miscellaneous
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Brake And Drive Tube
    3 Results
  • Gearcase
    3 Results
  • Water System
    3 Results
Find part by diagram >

Question and Answers

Q:

Roper washer blowing circuit breaker

A:

A Washer is definitely something we depend and when starts malfunctioning it can be a big inconvenience. I have attached some links below that give great information on way this may be happening. Hope it helps!

Read More
Priscilla V -
May 24, 2011
A:

Thanks for the links... But the circuit breaker blows as soon as I pull the knob to turn on the washer. It doesn't even have a chance to let the motor start.

Read More
Brian -
May 24, 2011
A:

Thank you for your question and I understand your concern however we communicate through the web site or thread and not by land line.

Based on my resources, the timer is no longer available for your model washer. I don't know what the part number of the timer sent but it's not likely the correct one because the timer is no longer available for your model and that's why it keeps tripping the circuit breaker.

I recommend contacting Sears Parts and let them know that the timer is no longer available for your model and the timer sent will not work and have them credit your account.

Read More
Joey S -
Sears Technician
May 26, 2011
A:

Actually, they sent me the wrong darn timer. I had a friend come-out and see what kept blowing the circuit, and he found this error. Sears has the wrong timer number listed in their system, and now they're telling me that I'm going to have to either (1) return the old one, wait to receive the refund, and then purchase the correct part, or (2) fork-out an extra $100 for the correct part and be out that amount of money until they process my refund. This doesn't seem right. I will be fighting them on this today.

Read More
Brian -
May 26, 2011
A:

Brian: Make sure you get the correct timer. Your old original timer should have a FSP part number on it. Be sure it matches the new timer and if it doesn�t then it will not likely work. I still believe the correct timer is not going to be available and if they do send one to replace the original there is a good chance it will not work. I wish you the best of luck in getting the correct timer. You may want to think about replacing the washer due to age and because of the the possibly of the timer not being available. I wish you the best of luck.

Read More
Joey S -
Sears Technician
May 26, 2011
See more answers

Top Parts