Model #R-930CS SHARP Countertop Microwave

  • Oven And Cabinet
    3 Results
  • Control Panel/door/miscellaneous
    3 Results
  • Packing And Accessories
    3 Results
  • Schematics
    3 Results
  • Schematics
    3 Results
Find part by diagram >

Question and Answers

Q:

My turntable on my microvave make a 1/4 turn then stops moving but makes a clicking sound. R-930CS Sharp Microwave

A:

Thank you for contacting SearsPartsDirect.com with your question about your Sharp microwave. I am so sorry the turntable doesn’t rotate. In this case, because the microwave will need to be opened to replace either the turntable motor or the coupling, I recommend you have the microwave serviced by a qualified technician.

We do not give repair information on microwave ovens because they are inherently dangerous to service. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is unplugged from the power supply. You need special equipment to work on a microwave starting with an anti-static wrist strap grounded to the microwave to even test components in it. Even minor door repairs and adjustments can cause microwave leakage, and a microwave shielding leakage test MUST be performed using a survey meter after ANY/ALL microwave service. 

For these safety reasons I strongly recommend having this repair completed by a qualified service technician. You can schedule service online at www.SearsHomeServices.com or by calling 1-800-4-MY-HOME (1-800-469-4663). Here at SearsPartsDirect.com we love to help you with your repairs, but our expert advice is that microwaves are just too dangerous for a do-it-yourself project. 

Thank you for your understanding in this matter and I hope we can help you with any other questions and repairs in the future. Thank you for choosing Sears.

 

 

Read More
Rachel Morgan -
Sears Technician
October 08, 2014
Q:

R930cs Microwave does not heat R-930CS Sharp Microwave

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

I am sorry and do understand your frustration when there are problems with the microwave.

Glad to help out.   Im  looking at your Sharp model number r-9030cs.

 I can appreciate wanting to diagnose and repair the microwave yourself, however I strongly recommend against it. We do not give repair information on microwave ovens because they are inherently dangerous to service. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is completely unplugged. You need special equipment to work on a microwave starting with an anti-static wrist strap grounded to the microwave to even test components in it. Even minor door repairs and adjustments can cause microwave leakage, and a microwave shielding leakage test MUST be performed using a survey meter after any microwave service.

It is no joke how dangerous these microwaves are when plugged in and also when not plugged in.   We have our Sears Service Techs at 1-800-469-4663 to get the help that you need.

 If you have further questions please let me know.

Thanks for choosing Sears PartsDirect.com


Read More
Larry L -
Sears Technician
November 19, 2013
Q:

How do I remove (just pull-it-out?) old part SHARP Microwave R-930CS - Part Number: NCPL-A021WRF0 (Turntable coupling)

A:

An expert shall have an answer to your question within 24 to 48 hours. Have a good day.

Read More
Alina F. -
January 13, 2011
A:

That turntable coupling appears to just pull straight up and off of the motor shaft. I do not see any set screw or fastener on that component. It may require significant upward force to remove it if it has never been removed.

Read More
Lyle W -
Sears Technician
January 14, 2011
See more answers