Model #R8 YAMAHA Misc Audio

  • No Image Available - Fidelitone
    3 Results
Find part by diagram >

Question and Answers

Q:

Diamondback Apex R8 Stationary Fitness bike won't power up. Diamondback APEX R8

Q:

Kenmore Elite 795 light stays on and melts the light cover.

A:

Providing a model number will definitely help an expert give you a better response. If you would like to reply to this thread with a model number I would be more than happy to help. Have a great day.

Read More
Alina F. -
December 11, 2010
A:

Model number 795.77543600

Read More
Stevil -
December 11, 2010
A:

Thanks for your question and I understand your concern. You should remove the light bulbs and then call for in home service. Without knowing the model number and serial number I can not be 100 percent certain, but this failure will most likely be covered under warranty.

I recommend calling Sears and setting up a service appointment at 1-800-4MY-HOME or 1-800-469-4663 to repair your refrigerator.

Read More
Joey S -
Sears Technician
December 13, 2010
A:

I see that you did add the model number. Based on the model number, the repair should be covered under warranty at no charge to you.

Read More
Joey S -
Sears Technician
December 13, 2010
A:

I am having this issue too. Plastic housing completely melted, food bad. Model number is 795.77243601. Not sure if I have extended warranty. What do I do next?

Read More
Jennifer -
September 02, 2012
A:

Jennifer: I recommend calling service to see if your model would be covered under warranty. The repair will most likely be covered under a warranty.

Read More
Joey S -
Sears Technician
September 04, 2012
A:

Same problem on mine. The fridge is about 8 years old and I do not know if I have an extended warranty. I unscrew the light bulbs but trow away lots of food because it was warm or the smell is very bad burn.

Read More
Stephan -
October 10, 2012
A:

Stephan: If you have the same model number, it should be covered at no charge but it will be one of models known to have this issue. Reply with the model number and serial number and I can check to see if it would be covered at no charge or not.

Read More
Joey S -
Sears Technician
October 10, 2012
A:

Hi Joey, I too have the light issue. Model Number 79577243601 Serial number 710mruy06742. Please let me know if I'm covered also. Did I see somewhere that there was a link to schedule the appointment? Thanks; it is nice that I could look this up. Forrest

Read More
Forrest -
December 13, 2012
A:

Forest: The issue of the lights not turning off and melting the plastic melting/warping is covered under an extended warranty. Call 1-800-469-4663 to set up a service appointment and let them know what the symtom is and ask them to bring the repair kit. Provide them the model number too.

Read More
Joey S -
Sears Technician
December 14, 2012
See more answers
Q:

deck deflector replacement 917.273373

A:

Thanks for the inquiry and for being a valued member. 

I was able to find an image showing the torsion spring orientation within the bracket and deflector. You have to hold the deflector and spring in position then slide the hinge pin in. First, you have to remove the push nut on the end of the hinge pin. Usually you have to use a pair of diagonal cutters to cut the nut off. After you have the nut off note the position of the spring. In order to install the spring and hinge rod you will need to remove the hinge bracket from the mower deck. Removing the bracket will help remove tension from the spring so that you can position the spring on the deflector and then slide the hinge rod through the spring.


Image result for Craftsman tractor deflector shield installation

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
March 27, 2015