Model #R-1850 SHARP Microwave/Hood Combo

  • Microwave
    3 Results
  • Control Panel/door
    3 Results
  • Oven Schematic
    3 Results
  • Oven Schematic
    3 Results
  • Pictorial Diagram
    3 Results
  • Touch Control Panel Circuit
    3 Results
Find part by diagram >

Question and Answers

Q:

The convection oven cuts off when it gets hot. I can't even cook bisquits. R1850A Sharp Microwave

A:

Thank you for choosing SearsPartsDirect. I know how much a time saver a microwave is and know you want to get it working quickly. In this case, I would suggest you have a qualified technician test or replace the unit.

Unfortunately, we cannot give advice on repairing or troubleshooting the microwave because they contain high voltage internal components that can retain lethal electrical charge even when the microwave is off. So for safety reasons I would recommend having this repair done by a qualified technician. You can schedule service at www.Searshomeservices.com

Thank you for your understanding on the situation. Have a great day.

Read More
Benny23 -
Sears Technician
July 27, 2015
Q:

Door Opener Failure R1850A Sharp Microwave

A:

I know what a time saver the microwave can be and how inconvenient it is when it isn't working.

I can appreciate wanting to diagnose and repair the microwave yourself, however I strongly recommend against it. We do not give repair information on microwave ovens because they are inherently dangerous to service. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is completely unplugged. You need special equipment to work on a microwave starting with an anti-static wrist strap grounded to the microwave to even test components in it. Even minor door repairs and adjustments can cause microwave leakage, and a microwave shielding leakage test MUST be performed using a survey meter after any microwave service.

For these safety reasons I strongly recommend having this repair completed by a qualified service technician. You can have it repaired at your home by a Sears technician by calling 1-800-469-4663. You can also click HERE to schedule an appointment online. Thank you for your understanding in this matter and I hope we can help you with any other questions and repairs in the future.

Read More
Jeff Wallace Sr -
Sears Technician
December 15, 2014
Q:

How do I remove/replace the control panel on my Kenmore microwave?

A:

Please see the images provided for the information you requested on replacing the touchpad for your Kenmore microwave oven.

Be sure the unit is disconnected from power .

Read More
biker dave -
Sears Technician
October 05, 2009
A:

I just want to add that you should not attempt this repair if you are not an experienced technician. Microwaves are inherently dangerous to service. They contain high voltage internal component that can retain a lethal electrical charge even when the microwave is completely unplugged. A microwave shielding leakage test must be performed on the unit using proper testing equipment following any internal component access or repair before the microwave can safely be returned to service. These are the reasons why I recommend that you have a service technician repair this microwave failure.

Read More
Sam A -
Sears Technician
August 23, 2010
A:

where is the fuse in the sharp convection oven R1850A

Read More
Anonymous -
August 02, 2013
A:

HAD A POWER SURG AND MY SHARP CONVECTION OVEN r1850A HAS NO POWER THE PLUG HAS POWER CAN YOU HELP

Read More
Anonymous -
August 02, 2013
A:

Anonymous - Thank you for contacting ManageMyLife.com with your questions about your microwave. I am so sorry to hear it was affected by a power surge. I know what a time saver the microwave can be and how inconvenient it is when it stops working. I apologize for the delay in this response. We were unaware an additional question had been posted.

 

I can appreciate wanting to diagnose and repair the microwave yourself, however I strongly recommend against it. We do not give repair information on microwave ovens because they are inherently dangerous to service. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is completely unplugged. You need special equipment to work on a microwave starting with an anti-static wrist strap grounded to the microwave to even test components in it. Even minor door repairs and adjustments can cause microwave leakage, and a microwave shielding leakage test MUST be performed using a survey meter after any microwave service.

 

For these safety reasons I strongly recommend having this repair completed by a qualified service technician. You can schedule service online at www.SearsHomeServices.com or by calling 1-800-4-MY-HOME(1-800-469-4663). Here at SearsPartsDirect.com we love to help you with your repairs, but our expert advice is that microwaves are just too dangerous for a do-it-yourself project.

 

Thank you for your understanding in this matter and I hope we can help you with any other questions and repairs in the future. Thank you for choosing Sears.

Read More
Rachel Morgan -
Sears Technician
September 05, 2013
See more answers