Model #R16 RICOH Full size VHS Camcorder

  • No Image Available - Fidelitone
    3 Results
Find part by diagram >

Question and Answers

Q:

Belt too long? 11072974103 Kenmore Gas dryer

A:

Thanks for the inquiry and for being a valued member.

Based upon the dryer model of 110.72974103, the dryer repair kit of 4392067 is the correct kit. If the belt seems too long, it is probably not routed correctly around the idler and motor pulley. I have provided an image below to show the routing of the belt. 

Image result for kenmore dryer belt routing

There are also some great YouTube videos you can watch to see how the belts are installed and routed. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
March 02, 2015
Q:

Light Bulbs for Oven Hood 23355222006

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about your Kenmore Elite range hood model 23355222006. I am so sorry the light bulbs burnt out and that the replacement bulbs you purchased didn’t work. I will be happy to help you with this.

Your range hood does not use standard appliance bulbs. It uses halogen bulbs.  I have located the correct bulbs for you product and have included the link below for you to order the part. They are sold individually so be sure to order at least 2. 

I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
January 20, 2015
A:

Dear Rachel, Thank you for trying but this is a larger bulb than the opening. It also said to out in the model number and when I did it said it couldn't find a bulb that matches this model. I am really upset as I paid almost $400 for this hood and is barely a year old and I am supposed to spend $22.00 a bulb that don't last a year? If it isn't the right one then what? This is crazy! Pamela Hayes

Read More
PAMELA -
January 20, 2015
A:

Thank you for your quick response and the additional information. I am so sorry this is a continuing source of frustration for you. Let me outline how I got the part number and then I will also tell you how we can get this issue resolved. 

The part number was not included on the parts list. That is why you were not able to find a bulb using the model number. I got the part number from page four of the owner’s manual. The original part number in the manual was 57853. The manual also references the Halogen bulbs on page 11, giving a part number of PAR20. Both of these numbers substituted over to the part number 57854 that I gave you. This was a manufacturer substitution and that is why I assumed the part would fit properly.  I am very sorry this information was incorrect. 

On page 11 of the manual, the manufacturer also references incandescent bulbs that will work with this range hood. The part number provided for those is R16. We do not carry this bulb at SearsPartsDirect. If you still have the old bulbs, I recommend taking one of them with you to your local hardware store to see if you can find this bulb. Take the old bulb so that you can compare the size to ensure the replacement will fit. The incandescent bulbs are usually much cheaper that the halogen bulbs. 

To find the correct part number for the halogen bulb we will need to submit a research to the manufacturer. To initiate this, please call our PartsDirect department at 1-800-366-7278. The reason you need to call is so that our Parts Advisor can get your contact information (phone number, address). Please do not post that information here as this is a public site. Our Parts Advisor will submit the request to our research team, who will then contact the manufacturer. Once we have a response from the manufacturer, our research team will contact you directly. (The reason we need your personal information.) The research usually takes about 3 to 5 days. 

I apologize for all the difficulty with replacing the bulbs. I hope this information helps. Please let me know if you need further assistance with this issue. Thank you again for choosing Sears. 
 

Read More
Rachel Morgan -
Sears Technician
January 21, 2015
See more answers
Q:

I need to have a Firmware update for a SRDV495 Combo Recorder SRDV495 Sylvania Dvd recorder, vcr

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dvd/vcr combo. Upon researching SRDV495; you would have to contact the manufacture for a firmware upgrade if one is available. A lot of times you need to be able to plug the unit into a computer to download online.

If you have any further questions please re-post. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
October 01, 2014