Model #R-1406 SHARP Microwave/Hood Combo

  • Oven/cabinet Parts
    3 Results
  • Control Panel/door Pats/miscellaneous
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Sharp Microwave Model R-1406 R-1406

A:

Thanks for the inquiry and for being a valued member.

I am sorry to hear of the power surge that knocked the display out a while back. I know how frustrating that is to have happen.

The issue could be with either the control board or the control panel, and without a meter test, it will be hard to identify which needs replacement. 

Unfortunately, the control panel assembly itself has since been discontinued for this microwave. The part number was FPNLCB425MRK0. The control board is still available, and the part number is CPWBFB069MRU0. 

We do not recommend doing repairs to the microwave yourself. The microwave contains high voltage that is retained even with the microwave unplugged. Doing repairs can also cause microwave leakage that can be very dangerous. We recommend having a service technician involved for the diagnosis/repair. 

If you would feel more confident have a Sears Home Service technician help assist with the diagnosis/repair, you can call 1-800-469-4663, or click here to be directed to the page to set up service.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
November 11, 2014
Q:

Digital Display not working R-1406 Sharp Microwave

A:

Thank you for contacting SearsPartsDirect.com with your questions about your Microwave. I am so sorry to hear that the microwave has stopped working. I know what a time saver the microwave can be and how inconvenient it is when it isn't working. 
 
I can appreciate wanting to diagnose and repair the microwave yourself, however I strongly recommend against it. We do not give repair information on microwave ovens because they are inherently dangerous to service. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is completely unplugged. You need special equipment to work on a microwave starting with an anti-static wrist strap grounded to the microwave to even test components in it. Even minor door repairs and adjustments can cause microwave leakage, and a microwave shielding leakage test MUST be performed using a survey meter after any microwave service.
 
For these safety reasons I strongly recommend having this repair completed by a qualified service technician. You can schedule service online at www.SearsHomeServices.com or by calling 1-800-4-MY-HOME(1-800-469-4663). Here at SearsPartsDirect.com we love to help you with your repairs, but our expert advice is that microwaves are just too dangerous for a do-it-yourself project. 
 
Thank you for your understanding in this matter and I hope we can help you with any other questions and repairs in the future. Thank you for choosing Sears.
 

Read More
Natasha12 -
Sears Technician
June 30, 2014
Q:

What is wrong with my Sharp R1406 microwave which made a loud pop when I hit start and now won't cook anything?

A:

Most likely the high voltage transformer or magnetron has shorted out.

A service technician will be needed to service the internal parts of the microwave.

Microwaves are inherently dangerous to service. Internal capacitors can retain a lethal electrical charge even when the microwave is unplugged. A microwave radiation leakage test must be performed on the unit following any repair. I recommend calling a service technician to repair this type of problem.

Read More
Fred M -
Sears Technician
March 03, 2009