Model #PYG2000AWW MAYTAG Residential Dryer

  • Control Panel
    3 Results
  • Cabinet
    3 Results
  • Door
    3 Results
  • Tumbler
    3 Results
  • Motor & Drive
    3 Results
  • Wiring Information
    3 Results
  • Gas Carrying
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

dryer start up pyg2000aww

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your dryer. Upon researching model pyg2000aww; usually a grinding noise indicates a bearing is going out or already out. It could be the bearing in the motor is putting stress on the motor and causing it to heat up. Turn the motor shaft by hand. Listen for a grinding noise or if it’s hard to turn.

Thank you for choosing Sears. We appreciate your business. Have a great day.    

Read More
Jeff Wallace Jr -
Sears Technician
February 10, 2015
Q:

W10410996 wiring PYG2000AWW

A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your dryer and do understand your frustration. Glad to help out. Im looking at your model number PYG2000AWW and on the wiring diagram I see the purple wire goes to "B" and orange goes to "A". White wire goes to "C1". I hope this imformation helps. I have included a link for the diagram. If you have further questions please let me know. Thank you for choosing Sears PartsDirect.com
 

Read More
Sherman_G_Wallace -
Sears Technician
January 13, 2014
Q:

Gas dryer roller drum kit spacers required inconsistency.

A:

I did some research but was not able to find an answer about the drum kit. Your expert will be able to help answer your question. To better help your expert, I would like to suggest adding your full model number. It may take 24-48 hours for your expert to reply. I do hope everything works out on the dryer.

Read More
Marc -
November 28, 2012
A:

The gas dryer is Performa Maytag PYG2000AWW.

Read More
jesus -
November 28, 2012
A:

Hi,

Thank you for your question and for letting me assist you with your repair.

Kit are updated and the old kits are removed from major vendor parts suppliers right away. You have the correct kit is sound like. Parts list are printed and not in PDF form in most cases and would not be cost effective to keep public lists updated. Buy from major parts suppliers, like SEARS and the parts are going to be correct.

I hope this is helpful. If I may be of further assistance please include more details in a reply to this entry below.
Thank you for using Manage My Life.

Read More
Bill__W -
Sears Technician
November 29, 2012
See more answers

Top Parts