Model #PSS25MGNAWW GE Side-by-Side Refrigerator

  • Freezer Door
    3 Results
  • Fresh Food Door
    3 Results
  • Freezer Section
    3 Results
  • Evaporator Instructions
    3 Results
  • Freezer Shelves
    3 Results
  • Ice Maker & Dispenser
    3 Results
  • Fresh Food Section
    3 Results
  • Fresh Food Shelves
    3 Results
  • Sealed System & Mother Board
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Refrigerator Defrost PSS25MGNAWW Ge Refrigerator n series

A:

Thank you for your question. I'm sorry you are having this problem with the refrigerator. If the fan motor is running but no cooling is taking place, it will first need to be determined if the compressor is running. If the compressor is running, then it would lead to a sealed system problem. A technician would be required to make this type of check and repair. However, if it did start cooling again by disconnecting the power and then reconnecting it again, it would indicate the main control board has failed. When the power is disconnected and then reconnected again, it resets the control board. In this case the control board # WR55X10552 located behind the cabinet would need to be replaced. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further. 

Read More
Scott D -
Sears Technician
August 16, 2013
Q:

What part do I need so the ice maker will not over produce ice?

A:

You can manually turn the ice maker OFF by pushing the "Power switch" off located on the side or face of the cover. The ice maker should shut off automatically when there is enough ice in the bin to cause the little wire feeler arm to stay up on top of the ice. There is a new style feeler arm part# WR49X10103 that should solve the problem of over ice production. It is designed so it will sense the ice level sooner and shut off the ice maker. I added the link below for the "Feeler arm field fix".

I recommend calling a service technician to remove and replace the feeler arm.

Read More
Joey S -
Sears Technician

Top Parts