Model #PSH23SGPABS GE Side-by-Side Refrigerator

  • Freezer Door
    3 Results
  • Sealed System & Mother Board
    3 Results
  • Fresh Food Door
    3 Results
  • Freezer Section
    3 Results
  • Evaporator Instructions
    3 Results
  • Freezer Shelves
    3 Results
  • Ice Maker & Dispenser
    3 Results
  • Fresh Food Section
    3 Results
  • Fresh Food Shelves
    3 Results
  • Custom Cool
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Reset psh23sgpa bs PSH23SGPABS Ge Refrigerator p series

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your fridge and I do understand your frustration. Glad to help out. I'm looking at your model number psh23sgpabs and you should have two fans running, one inside the freezer and one located at the bottom back of the refrigerator. You also should hear the compressor running in the bottom back of the refrigerator too. 


If both fans and the compressor is running then it could have a sealed system failure/compressor, leak in the sealed system or it could be just a defrost failure. Open the freezer and look at the lower rear panel. If you see ice/frost accumulating on the panel then you likely have a defrost failure. The cooling coils (evaporator) is located behind that panel and if the unit fails to go into a self-defrosting cycle frost and ice will accumulate on the coils of the evaporator and restrict airflow causing the fresh food section to become warmer and eventually the freezer side will begin to warm up also. You are able to unplug the fridge and sometimes the board will reset and function proper but will return to its issue if the board is bad. This type of symptom of not cooling should be diagnosed and repaired by a service technician. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
October 01, 2014
Q:

how do i reset the refrigerator from the temp controll panel. It isnt cooling. PSH23SGPABS Ge Refrigerator p series

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your fridge and I do understand your frustration. Glad to help out. I'm looking at your model number psh23sgpabs and you should have two fans running, one inside the freezer and one located at the bottom back of the refrigerator. You also should hear the compressor running in the bottom back of the refrigerator too. 


If both fans and the compressor is running then it could have a sealed system failure/compressor, leak in the sealed system or it could be just a defrost failure. Open the freezer and look at the lower rear panel. If you see ice/frost accumulating on the panel then you likely have a defrost failure. The cooling coils (evaporator) is located behind that panel and if the unit fails to go into a self-defrosting cycle frost and ice will accumulate on the coils of the evaporator and restrict airflow causing the fresh food section to become warmer and eventually the freezer side will begin to warm up also. You are able to unplug the fridge and sometimes the board will reset and function proper but will return to its issue if the board is bad. This type of symptom of not cooling should be diagnosed and repaired by a service technician. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
October 01, 2014

Top Parts