Model #PR1842STC POULAN Lawn, Tractor

Find part by diagram >

Question and Answers

Q:

Rear tire dust cover PR1842STC Poulan Lawn tractor

Q:

disengaging the blades PR1842STC Poulan Lawn tractor

A:

Locate the nut for the pivot point on the mower deck. This is where the clutching idler pivots. Loosen that nut a few turns and then oil up the pivot area with some penetrating oil. Work the PTO lever back and forth a few times and then tighten the nut back until it's just snug and that the should be fine.

Thank you for using Manage My Life!

Read More
Wade_B -
Sears Technician
October 14, 2013
Q:

will model 486.248392 snow thrower fit poulan tractor model PR1842STC

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Alina -
May 10, 2013
A:

Thank you for your question. 

I will be happy to assist you. The model number for the tractor is not the complete model number. To be 100 percent sure the blower will fit I will need all the numbers from under the seat. I did go ahead and look up what I could. I think the blower will fit. If you are buying the unit used, I recommend test fitting it before you purchase it. The reason why is often times customers will buy a used blower only to find they did not get all the mounting hardware. Then have to order the sometimes-expensive parts. 

  

I hope this is helpful. Please let me know if you need further assistance. 

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
May 12, 2013
See more answers

Top Parts