Model #PP5020AV POULAN Chainsaw, Gas

  • Cylinder/crankshaft/muffler
    3 Results
  • Oil Pump/spike Kit
    3 Results
  • Chassis/bar/handle
    3 Results
Find part by diagram >

Question and Answers

Q:

chain stops turning when trying to cut? pp5020av

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is problems with the chain saw.
 
Glad to help out.   Im  looking at your Craftsman Poulan model number pp5020av.

The information on the saw. If the engine speeds up but the chain stops, I suspect the problem is a worn clutch. To repair this problem you have to replace the clutch and possibly the clutch drum. If the sprocket is worn, the drum should be replaced also.  It would be wise to change both the clutch and the drum clutch.   

Clutch for the model pp5020av

Drum Clutch for the model pp5020av
 
 
Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
June 10, 2014
Q:

Chain saw dies when turned on its side pp5020av

A:

Check the fuel lines to make sure they are not cracked or broken. If that looks good then the kill wire may be getting onto something when you turn the machine (I've had this happen more than once).

As for rebuilding the carburetor. It will typically take about 30 mins to rebuild one unless it's really bad and then it will need to have some attention to get everything cleaned out.

Thank you for using Manage My Life!

Read More
Wade_B -
Sears Technician
September 18, 2013

Top Parts