Model #PN42C450B1DXZA SAMSUNG Plasma Television

  • Cabinet Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Samsung Plasma model PN42C450B1DXZA won't turn on. Push power button and there is a blinking noise but nothing else happens. PN42C450B1DXZA Samsung Plasma tv

A:

Thank you for being a Sears’ valued member and for contacting SearsPartsDirect.com with your question about your Samsung Plasma TV model PN42C450B1DXZA. I am so sorry it will not turn on. I know the TV is a key part of our daily lives and know you want to get it fixed quickly. In this case, I recommend you have the TV repaired by a qualified technician.

Your mentioned there is a blinking noise, which indicates there is power to the TV. You can check the outlet by plugging a lamp or hair dryer into the outlet and see if it will operate. If the socket is the issue, you will want to check the circuit breaker. Any repairs to the outlet should be completed by a qualified electrician.

If the outlet is not the issue, I recommend you have the TV tested and repaired by a qualified. We do not give repair advice on televisions because internal components in the TV can retain dangerously high electrical charges, even when the TV is disconnected from the power supply. This retained electricity can be lethal if not discharged properly.  Here at SearsPartsDirect.com we love to help you with your home repairs but in this case, for your safety, we recommend you have the TV serviced. To set up service go towww.SearsHomeServices.com or call 1-800-469-4663 (1-800-4MY-HOME). 

Thank you for your understanding in this matter. I hope we can help you with any future repairs. Thank you for choosing Sears, we appreciate your business.

 

Read More
Rachel Morgan -
Sears Technician
September 26, 2014
Q:

Samsung Plasma model PN42C450B1DXZA won't turn on. Push power button and there is a blinking noise but nothing else happens. PN42C450B1DXZA Samsung Plasma tv

A:

Thank you for being a Sears’ valued member and for contacting SearsPartsDirect.com with your question about your Samsung Plasma TV model PN42C450B1DXZA. I am so sorry it will not turn on. I know the TV is a key part of our daily lives and know you want to get it fixed quickly. In this case, I recommend you have the TV repaired by a qualified technician.

Your mentioned there is a blinking noise, which indicates there is power to the TV. You can check the outlet by plugging a lamp or hair dryer into the outlet and see if it will operate. If the socket is the issue, you will want to check the circuit breaker. Any repairs to the outlet should be completed by a qualified electrician.

If the outlet is not the issue, I recommend you have the TV tested and repaired by a qualified. We do not give repair advice on televisions because internal components in the TV can retain dangerously high electrical charges, even when the TV is disconnected from the power supply. This retained electricity can be lethal if not discharged properly.  Here at SearsPartsDirect.com we love to help you with your home repairs but in this case, for your safety, we recommend you have the TV serviced. To set up service go towww.SearsHomeServices.com or call 1-800-469-4663 (1-800-4MY-HOME). 

Thank you for your understanding in this matter. I hope we can help you with any future repairs. Thank you for choosing Sears, we appreciate your business.

 

Read More
Rachel Morgan -
Sears Technician
September 26, 2014
Q:

plasma tv model # PN42C450B1DXZA showning hdm12 on screen cannot see chanel numbers how to remove from the screen

A:

It can be very frustrating when our television is on the blink.The ManageMyLife website is a great place to find answer to questions that need qualified and insightful responses. Some of these questions that are asked will need specific researched and will be answered by an expert with-in two business days but usually sooner. I found an expert answer that may help. It is attached below.

Read More
James -
March 03, 2012
A:

The HDMI 2 showing on the screen is the input you are on. If you are using a cable or satellite box hooked up to HDMI 2 then the box is off, the HDMI cable got disconnected, or there is a problem with the box. If you are not using a cable or satellite box and the cable runs from the wall to the TV then you need to press the input button and press it. The inputs should cycle through the different inputs until you reach the cable input.

Read More
Dusty J -
Sears Technician
March 05, 2012
See more answers

Top Parts

Top Accessories