Model #PLGF659GCA FRIGIDAIRE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer/smalldoor
    3 Results
  • Oven Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Need to know locations of each orifice for lp to natural gas stove, and how to set regulator to natural gas.

A:

I'm sorry to hear that you are having some difficulties with converting your Range . I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assist you.

Read More
Priscilla V -
October 26, 2011
A:

NOTE: This conversion should be completed by a qualified installed.

Here are the BTU capacities of the burners for that cook top:

  • Center -- 17K BTU
  • Right Front -- 12K BTU
  • Right Rear -- 5K BTU
  • Left Front -- 14K BTU
  • Left Rear -- 9.5K BTU

I do not have information on the markings for those orifices. If you reply with the markings on your orifices, we should be able to match them to the correct burners.

The LP conversion kit had instructions for converting the regulator to Propane gas. The instructions for that conversion need to be reversed to change that regulator back to natural gas. I do not have a copy of those instructions. I have requested a copy from the manufacturer. I will update this thread with those instructions as soon as I receive that document.

If you need a qualified installer to complete this conversion, I recommend that you contact your local gas supplier. You may also be able to find a pre-screened service provider on the ServiceLive.com website. Here is a link for that website: ServiceLive.com .

Read More
Lyle W -
Sears Technician
October 26, 2011
A:

Thanks for the hep, the numbers on each individual orifice are 109, 154, 175, 193, and 199. I have one other question, is there anything I need to do for the stove or broiler because in the conversion kit te 5 orifices were the only thing in the package, and thanks again.

Read More
kenny -
October 27, 2011
A:

I don't have information on the markings for those orifices yet. I am still waiting for the LP conversion kit instructions. You will need to convert the pressure regulator back to natural gas. The orifice spuds on the oven burners will need to be backed off to the LP position. The oven burner air shutters will also need to be adjusted. I will update this thread as soon as I receive the LP conversion kit instructions that show how to convert that pressure regulator.

Read More
Lyle W -
Sears Technician
October 28, 2011
A:

Okay Kenny. I got the LP conversion kit instructions from the manufacturer. The first page below shows the marking on the natural gas orifices. You can use that information to position the orifices on the proper burners. I included the other page from the LP conversion instructions as well. The 4th page below shows the instructions for converting the range back to natural gas. If you need more help, let us know.

Read More
Lyle W -
Sears Technician
October 31, 2011
A:

Here is the 4th image.

Read More
Lyle W -
Sears Technician
October 31, 2011
See more answers

Top Parts